The Case IH 5240 Maxxum specifications include PTO power rated at 100 hp (74.6 kW), transmission options including synchronized or 4-speed power shift and a listed weight of 9,787 to 11,067 lbs.
Case IH 5240 Maxxum key specifications
PTO power
100 hp (74.6 kW)
Displacement
359 cu in (5.9 L)
Transmission
synchronized or 4-speed power shift
Fuel capacity
35.7 gal (135.1 L)
Weight
9,787 to 11,067 lbs
Rear PTO
independent
Case IH 5240 Maxxum industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
PTO power100 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement5.9 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity35.7 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight11,067 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
This model Industry average
Engine specifications
Bore/Stroke
4.02 × 4.72 inches (102 × 120 mm)
Rated RPM
2,200
Starter volts
12
Engine speed range
850-2,355
Transmission options
Gears
16 forward and 12 reverse
PTO and hitch
Rear hitch category
Category II
Hitch control
lower-link draft sensing
Rear lift
7,700 lbs (3,492 kg)
Front hitch category
Category II (optional)
Front lift (at 24"/610mm)
5,200 lbs (2,358 kg)
Rear PTO speed
540 or 1,000 rpm
Hydraulics
Hydraulic type
closed center pressure-flow compensated
Hydraulic pressure
2,600 psi (179.3 bar)
Valves
1 to 3
Pump flow
20 gpm (75.7 L/min)
Mechanical specifications
Clutch
electro-hydraulic wet disc
Differential lock
electro-hydraulic rear
Electrical specifications
Electrical ground
negative
Charging system
alternator
Charging amps
65
Batteries
1
Battery volts
12
Dimensions and weight
@WD Clearance (front axle)
22.1 inches (56 cm)
4WD front axle clearance
18.4 inches (46 cm)
Drawbar clearance
18.8 inches (47 cm)
Rear axle bar
96 inches (2,438 mm)
Steering wheel height
80.7 inches (204 cm)
Hood height
69.8 inches (177 cm)
Cab height
106.1 inches (269 cm)
Exhaust height
107.6 inches (273 cm)
Tires and tread
Front tread
60 to 88 inches (152 to 223 cm)
Rear tread
60 to 88 inches (152 to 223 cm, flange) or 60 to 110 inches (152 to 279 cm, bar)
Front tire
10.00-16
Rear tire
18.4-38
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
