The Case IH 5220 Maxxum specifications include PTO power rated at 80 hp (59.7 kW), transmission options including synchronized or 4-speed power shift and a listed weight of 9,127 to 10,361 lbs.
Case IH 5220 Maxxum key specifications
PTO power
80 hp (59.7 kW)
Displacement
239 cu in (3.9 L)
Transmission
synchronized or 4-speed power shift
Fuel capacity
35.7 gal (135.1 L)
Weight
9,127 to 10,361 lbs
Rear PTO
independent
Case IH 5220 Maxxum industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
PTO power80 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement3.9 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity35.7 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight10,361 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
This model Industry average
Engine specifications
Bore/Stroke
4.02 × 4.72 inches (102 × 120 mm)
Rated RPM
2,200
Fuel system
direct injection
Starter volts
12
Engine speed range
850-2,355
Transmission options
Gears
16 forward and 12 reverse
PTO and hitch
Rear hitch category
Category II
Hitch control
lower-link draft sensing
Rear lift
7,700 lbs (3,492 kg)
Front hitch category
Category II (optional)
Front lift (at 24"/610mm)
5,200 lbs (2,358 kg)
Rear PTO speed
540 or 1,000 rpm
Hydraulics
Hydraulic type
closed center pressure-flow compensated
Hydraulic pressure
2,600 psi (179.3 bar)
Valves
1 to 3
Pump flow
20 gpm (75.7 L/min)
Mechanical specifications
Clutch
electro-hydraulic wet disc
Differential lock
electro-hydraulic rear
Electrical specifications
Electrical ground
negative
Charging system
alternator
Charging amps
65
Batteries
1
Battery volts
12
Dimensions and weight
2WD front axle clearance
22.1 inches (56 cm)
4WD front axle clearance
17.2 inches (43 cm)
Drawbar clearance
17.8 inches (45 cm)
Rear axle bar
96 inches (2,438 mm)
Steering wheel height
78.4 inches (199 cm)
Hood height
68.8 inches (174 cm)
Cab height
105.2 inches (267 cm)
Exhaust height
106.7 inches (271 cm)
Tires and tread
Front tread
60 to 88 inches (152 to 223 cm)
Rear tread
60 to 88 inches (152 to 223 cm, flange) or 60 to 110 inches (152 to 279 cm, bar)
Front tire
7.50-16
Rear tire
18.4-34
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
