The Case IH 1056 XL tractor battery spec found is 12 V with 760 CCA.
Voltage12 V
Cold cranking amps760 CCA
Case IH 1056 XL Battery Size Details
Replacement battery recommendation
The recommended replacement battery for a Case IH 1056 XL tractor is a conventional lead-acid (PLOMO/ACIDO) battery with 110 Ah capacity, 760 A cranking power, and dimensions of 514x175x210 mm, with the VARTA I2 model. – 12 V, 760 CCA
Battery voltage
12 V
Battery CCA
760 CCA
Battery CCA Comparison Chart
Battery CCA comparison
This model
760 CCA
Average
850 CCA
Low
650 CCA
High
1,100 CCA
Benchmarks use practical low, average and high cold-cranking-amp ranges for the utility tractor category. Use the exact battery label and manual before buying.
Case IH 1056 XL Extra Battery Notes
Replacement note
For the Case IH 1056 XL, match the replacement battery to the captured spec: 12 V, 760 CCA. Physical fit, terminal layout and hold-down fit still matter
Battery location
The battery on the Case IH 1056 XL tractor is typically located under the seat or on the right side of the tractor near the engine compartment
Bad battery symptoms
Case IH 1056 XL tractor battery issues typically show as hard starting or no response when turning the key, a clicking sound from the starter, or rapid battery drain that fails to hold charge. Corroded or loose battery terminals and charging system faults (alternator, voltage regulator) also indicate a failing battery
Safe removal note
Disconnect the negative cable first, then disconnect the positive cable. Install the new battery, connect the positive cable first, then reconnect the negative cable last. That reduces the chance of shorting a tool against the frame
Official information note
Mistakes do happen. Battery specs can change by year, engine, market, terminal layout and installed options. Check the old battery label, operator manual, parts book and official caseih.com website before ordering a replacement battery.
