The Allis Chalmers WF tractor weighs 3,175 lb (1,440 kg) using its primary published weight. That places it around the 1st percentile among comparable standard-tread tractors, lighter than about 99% of its peers. With 22 hp, the tractor carries about 144.3 lb of published weight per horsepower.
The published Allis Chalmers WF weight is 3,175 lb (1,440 kg). The primary figure used for comparisons is 3,175 lb (1,440 kg), listed as Weight.
Tractor-weight benchmark
How this weight compares
Standard-Tread Tractor peers · 53 tractors in the benchmark.
Representative published weight
Very light
3,175 lb
Low4,166 lb
This model3,175 lb
Average8,399 lb
High13,320 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight3,175 lb (1,440 kg)
Overall weight bandMidweight
Tractor typeStandard-Tread Tractor
Primary horsepower22 hp / 16.4 kW
Max length118.75 in (301 cm)
Max width57.5 in (146 cm)
Overview
Model information
Manufacturer
Allis Chalmers
Model
WF
Category
Farm tractor
Model years
1938 – 1951
Tractor type
Standard-Tread Tractor
Published weight variants
1
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
Weight
—
3,175 lb
1,440 kg
1.59
—
Dimensions, power & hauling
Technical details
Dimensions
Wheelbase70 in (177 cm)
Length118.75 in (301 cm)
Width57.5 in (146 cm)
Height55 in (139 cm)
Power & weight ratios
Primary power22 hp (16.4 kW)
Power basisPTO (claimed)
Weight per horsepower144.3 lb/hp
Weight per foot of length320.8 lb/ft
Wheelbase / length58.9%
Transport snapshot
Primary published weight3,175 lb (1,440 kg)
Maximum published weight3,175 lb (1,440 kg)
Maximum US-ton equivalent1.59 US tons
Maximum published width57.5 in (146 cm)
Published width over 102 inNo
Weight context
Weight range3,175 lb (1,440 kg)
Primary weight basisWeight
Peer positionVery light among Standard-Tread Tractor peers · 1st percentile
Physical size classBelow-average size
For transport planning, the representative published tractor weight is about 3,175 lb (1.59 US tons); published configurations reach 3,175 lb (1.59 US tons); the widest published tractor dimension is 57.5 in (4.8 ft). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
Massey Ferguson 133 (3175 lb)
Massey Ferguson 1635 (3175 lb)
Massey Ferguson 37 (3179 lb)
Kubota L4610 (3180 lb)
Mahindra 1538 (3186 lb)
Closest comparable tractors
J.I. Case VA (3200 lb, 17 hp)
John Deere Unstyled D (4090 lb)
J.I. Case 10-18 (3760 lb, 18.1 hp)
J.I. Case C (4300 lb, 21.4 hp)
Allis Chalmers L (4400 lb, 21.42 hp)
Common questions
Allis Chalmers WF weight FAQ
How much does an Allis Chalmers WF weigh?
The Allis Chalmers WF weighs 3,175 lb (1,440 kg) using the primary published weight figure.
Is the Allis Chalmers WF a lightweight standard-tread tractor?
Yes. The representative figure sits at about the 1st percentile, lighter than roughly 99% of the standard-tread tractor peers. That puts it in the very light range for this comparison. It is 5,224 lb lighter than the peer-group average of 8,399 lb.
How wide is the Allis Chalmers WF for transport?
The maximum published tractor width is 57.5 in (4.8 ft). That is 44.5 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the Allis Chalmers WF weight-to-horsepower ratio?
Using the page’s representative 3,175 lb weight and 22 hp power figure, the tractor carries about 144.3 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Allis Chalmers WF weigh?
The representative published weight is about 1.59 US tons, while the full published range is 1.59 US tons. Loaded transport weight can be higher than the tractor specification.
