The Allis Chalmers HD10 tractor weighs 20,380 lb (9,244 kg) using its published Shipping 62-inch tread weight. Other useful published figures are 21,455 lb (Weight) and 21,050 lb (Shipping — 74-inch tread). That places it around the 57th percentile among tractors in the dataset, close to the middle of its peer group.
The published Allis Chalmers HD10 weight is 20,380–21,455 lb (9,244–9,731 kg). The primary figure used for comparisons is 20,380 lb (9,244 kg), listed as Shipping — 62-inch tread. The published configurations span 1,075 lb, a 5.3% difference from the lightest listed setup.
Tractor-weight benchmark
How this weight compares
All tractors in this dataset · 2,282 tractors in the benchmark.
Representative published weight
Heavy
20,380 lb
Low1,984 lb
This model20,380 lb
Average9,927 lb
High21,767 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight20,380–21,455 lb (9,244–9,731 kg)
Overall weight bandVery heavy
Tractor typeFarm tractor
Primary horsepower82.2 hp / 61.3 kW
Max length150 in (381 cm)
Max width94 in (238 cm)
Overview
Model information
Manufacturer
Allis Chalmers
Model
HD10
Category
Farm tractor
Model years
1940 – 1950
Tractor type
Farm tractor
Published weight variants
3
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
Weight
—
21,455 lb
9,731 kg
10.73
—
Shipping
62-inch tread
20,380 lb
9,244 kg
10.19
—
Shipping
74-inch tread
21,050 lb
9,548 kg
10.53
—
Configuration effect
How configuration changes the weight
1,075 lbLightest to heaviest · 5.3% spread across published variants
Dimensions, power & hauling
Technical details
Dimensions
Length150 in (381 cm)
Width94 in (238 cm)
Height78 in (198 cm)
Power & weight ratios
Primary power82.2 hp (61.3 kW)
Power basisDrawbar (tested)
Weight per horsepower248 lb/hp
Weight per foot of length1,630.4 lb/ft
Transport snapshot
Primary published weight20,380 lb (9,244 kg)
Maximum published weight21,455 lb (9,731 kg)
Maximum US-ton equivalent10.73 US tons
Maximum published width94 in (238 cm)
Published width over 102 inNo
Weight context
Weight range20,380–21,455 lb (9,244–9,731 kg)
Primary weight basisShipping — 62-inch tread
Peer positionHeavy among All tractors in this dataset · 89th percentile
Physical size classMid-size
For transport planning, the representative published tractor weight is about 20,380 lb (10.19 US tons); published configurations reach 21,455 lb (10.73 US tons); the widest published tractor dimension is 94 in (7.8 ft). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
Massey Ferguson 8470 (20370 lb)
Massey Ferguson 8480 (20370 lb)
New Holland TG230 (20340 lb)
John Deere 8410 (20440 lb)
New Holland TG210 (20455 lb)
Closest comparable tractors
Allis Chalmers WS (20155 lb, 84 hp)
Allis Chalmers S (20100 lb, 84.3 hp)
International Harvester TD-18 (21500 lb, 72.38 hp)
Allis Chalmers L (22000 lb, 91.99 hp)
John Deere 5020 (17350 lb)
Common questions
Allis Chalmers HD10 weight FAQ
How much does an Allis Chalmers HD10 weigh?
The Allis Chalmers HD10 weighs 20,380 lb (9,244 kg) using the published Shipping — 62-inch tread figure. Across the published configurations on this page, weight ranges from 20,380 to 21,455 lb (9,244 to 9,731 kg).
Is the Allis Chalmers HD10 a heavy farm tractor?
Yes. The representative figure sits at about the 89th percentile, heavier than roughly 89% of the all tractors in this dataset. That puts it in the heavy range for this comparison. It is 10,453 lb heavier than the peer-group average of 9,927 lb.
How wide is the Allis Chalmers HD10 for transport?
The maximum published tractor width is 94 in (7.8 ft). That is 8 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
Does the Allis Chalmers HD10 weigh more than 10,000 lb?
Yes. The representative published weight is 20,380 lb, and the heaviest published configuration on this page is 21,455 lb (10.73 US tons). Any trailer calculation also needs the trailer itself plus fuel, ballast, attachments and other equipment.
What is the Allis Chalmers HD10 weight-to-horsepower ratio?
Using the page’s representative 20,380 lb weight and 82.2 hp power figure, the tractor carries about 248 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Allis Chalmers HD10 weigh?
The representative published weight is about 10.19 US tons, while the full published range is 10.19–10.73 US tons. Loaded transport weight can be higher than the tractor specification.
