The Allis Chalmers FD3 tractor weighs 3,150 lb (1,428 kg) using its primary published weight. That places it around the 9th percentile among tractors in the dataset, lighter than about 91% of its peers. With 25 hp, the tractor carries about 126 lb of published weight per horsepower.
The published Allis Chalmers FD3 weight is 3,150 lb (1,428 kg). The primary figure used for comparisons is 3,150 lb (1,428 kg), listed as Weight.
Tractor-weight benchmark
How this weight compares
All tractors in this dataset · 2,282 tractors in the benchmark.
Representative published weight
Light
3,150 lb
Low1,984 lb
This model3,150 lb
Average9,927 lb
High21,767 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight3,150 lb (1,428 kg)
Overall weight bandMidweight
Tractor typeFarm tractor
Primary horsepower25 hp / 18.6 kW
Max length112.2 in (284 cm)
Max height51.2 in (130 cm)
Overview
Model information
Manufacturer
Allis Chalmers
Model
FD3
Category
Farm tractor
Model years
2000 – 2024
Tractor type
Farm tractor
Published weight variants
1
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
Weight
—
3,150 lb
1,428 kg
1.57
—
Dimensions, power & hauling
Technical details
Dimensions
Length112.2 in (284 cm)
Height51.2 in (130 cm)
Power & weight ratios
Primary power25 hp (18.6 kW)
Power basisEngine
Weight per horsepower126 lb/hp
Weight per foot of length336.9 lb/ft
Transport snapshot
Primary published weight3,150 lb (1,428 kg)
Maximum published weight3,150 lb (1,428 kg)
Maximum US-ton equivalent1.57 US tons
Weight context
Weight range3,150 lb (1,428 kg)
Primary weight basisWeight
Peer positionLight among All tractors in this dataset · 21st percentile
Physical size classSmall
For transport planning, the representative published tractor weight is about 3,150 lb (1.57 US tons); published configurations reach 3,150 lb (1.57 US tons). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
Kubota L3240 (3153 lb)
Yanmar AF-33 (3153 lb)
Yanmar F360 (3153 lb)
International Harvester D-436 (3142 lb)
Kubota L305 (3140 lb)
Closest comparable tractors
Case IH Farmall 35A Series II (3067 lb)
Case IH Farmall 40A Series II (3067 lb)
Mahindra 2310 (3064 lb, 25 hp)
John Deere 3120 (3000 lb)
John Deere 420 (3250 lb, 26.15 hp)
Common questions
Allis Chalmers FD3 weight FAQ
How much does an Allis Chalmers FD3 weigh?
The Allis Chalmers FD3 weighs 3,150 lb (1,428 kg) using the primary published weight figure.
Is the Allis Chalmers FD3 a lightweight farm tractor?
Yes. The representative figure sits at about the 21st percentile, lighter than roughly 79% of the all tractors in this dataset. That puts it in the light range for this comparison. It is 6,777 lb lighter than the peer-group average of 9,927 lb.
What is the Allis Chalmers FD3 weight-to-horsepower ratio?
Using the page’s representative 3,150 lb weight and 25 hp power figure, the tractor carries about 126 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Allis Chalmers FD3 weigh?
The representative published weight is about 1.57 US tons, while the full published range is 1.57 US tons. Loaded transport weight can be higher than the tractor specification.
