The Victa 8/34E 1975 only ride-on mower uses two published belt sizes: 5/8" Wide x 64" I.D. for the cutter deck belt and 5/8" Wide x 63" I.D. for the transmission drive belt / engine to gearbox. Match each belt to its correct position and OEM reference before ordering.
Belt replacement guide
Victa 8/34E 1975 only belt size & replacement chart
OEM references, belt positions and published dimensions for this ride-on mower.
Match the belt function first, then confirm the OEM number and size.
Belt application
OEM / replacement number
Published size
Listing SKU
Mower deck Cutter Deck Belt
TM60377A, 754-0151
5/8" Wide x 64" I.D.
BEL6967
Transmission / motion Transmission Drive Belt / Engine To Gearbox
TM60374A, 754-0127
5/8" Wide x 63" I.D.
BEL6966
Application details
Which Victa 8/34E 1975 only belt do you need?
Cutter Deck Belt
Recorded OEM references: TM60377A, 754-0151. Published size: 5/8" Wide x 64" I.D.
Transmission Drive Belt / Engine To Gearbox
Recorded OEM references: TM60374A, 754-0127. Published size: 5/8" Wide x 63" I.D.
Important: Confirm the belt position, deck size, serial range and machine configuration before ordering. Belts with the same length can use different widths or profiles.
Common questions
Victa 8/34E 1975 only belt FAQ
What belt does the Victa 8/34E 1975 only use?
The listed belt applications are Cutter Deck Belt and Transmission Drive Belt / Engine To Gearbox. Recorded OEM references: TM60377A, 754-0151, TM60374A, and 754-0127.
What are the Victa 8/34E 1975 only belt part numbers?
The recorded OEM references are TM60377A, 754-0151, TM60374A, and 754-0127. Match each number to the correct belt position before ordering.
What belt sizes does the Victa 8/34E 1975 only use?
Cutter Deck Belt: 5/8" Wide x 64" I.D. and Transmission Drive Belt / Engine To Gearbox: 5/8" Wide x 63" I.D.
Why are multiple belts listed for the Victa 8/34E 1975 only?
This machine has 2 recorded belt applications. Different belts can operate the mower deck, transmission, PTO, clutch or other drive components.
Can I match the Victa 8/34E 1975 only belt by length alone?
No. Width, profile, inside or outside circumference, belt position and OEM reference can all affect fitment. Match the belt function and OEM number first, then use the dimensions as a final check.
