In specification terms, the Hyster h800hd Rough Terrain Forklift (2021-2026) shows high engine power at 350 hp (261 kW) alongside high weight at 115,390 lb (52.3 t). The listed maximum torque is 1,200 lb-ft (1,627 Nm).
Specification profile
Rough Terrain Forklift | 2021-2026
Weight: 115,390 lb (52.3 t)Engine power: 350 hp (261 kW)Engine speed at max torque: 1,500 rpmMaximum torque: 1,200 lb-ft (1,627 Nm)
115,390 lb (52.3 t)Weight
350 hp (261 kW)Engine power
1,500 rpmEngine speed at max torque
1,200 lb-ft (1,627 Nm)Maximum torque
13.8 ft (4.2 m)Total Width
13 ft (3.95 m)Construction Height
14.5 ft (4.41 m)Lifting Height
19/20 km/hTravel Speed With / Without Load
How it compares
Low, average or high?
Engine power
High
350 hp (261 kW)
Low 40.8 hp (30.4 kW)Typical 142 hp (106 kW)High 380 hp (283 kW)
Engine power is well above the typical figure.
Weight
High
115,390 lb (52.3 t)
Low 7,650 lb (3.47 t)Typical 44,513 lb (20.2 t)High 164,383 lb (74.6 t)
Weight is well above the typical figure.
Maximum torque
High
1,200 lb-ft (1,627 Nm)
Low 137 lb-ft (186 Nm)Typical 681 lb-ft (924 Nm)High 1,235 lb-ft (1,674 Nm)
Maximum torque is well above the typical figure.
Construction Height
Average
13 ft (3.95 m)
Low 6.86 ft (2.09 m)Typical 12.4 ft (3.77 m)High 35.4 ft (10.8 m)
Construction Height is close to the typical figure.
Displacement
High
2.35 US gal (8.9 L)
Low 0.48 US gal (1.83 L)Typical 1.44 US gal (5.47 L)High 2.85 US gal (10.8 L)
Displacement is well above the typical figure.
Lifting Height
Below average
14.5 ft (4.41 m)
Low 9.84 ft (3 m)Typical 18.3 ft (5.59 m)High 62.1 ft (18.9 m)
Lifting Height is below the typical figure.
Visual overview
Key measurements
Measurements
Related measurements grouped for faster scanning.
Related measurements
Additional published measurements that share the same unit.
Overview
Model information
| Manufacturer | Hyster |
|---|---|
| Model | h800hd |
| Category | Rough Terrain Forklift |
| Model year / production | 2021-2026 |
Full specifications
Technical details
Performance
Engine power350 hp (261 kW)
Maximum torque1,200 lb-ft (1,627 Nm)
Engine speed at max torque1,500 rpm
Travel Speed With / Without Load19/20 km/h
Dimensions
Construction Height13 ft (3.95 m)
Lifting Height14.5 ft (4.41 m)
Total Width13.8 ft (4.2 m)
Capacity & weight
Weight115,390 lb (52.3 t)
Hoisting With / Without Load0.21/0.23 m/s
Lowering With Load0.5 m/s
Nominal Load at COG80,028 lb (36.3 t)
Engine & drivetrain
Displacement2.35 US gal (8.9 L)
Emission levelTier 4f/ Stage IV
Engine manufacturerCummins
Engine typeQSL 9L
Number of cylinders6.0
Setup & fitment
Standard tyresFront: 18.00-25 40PR / Rear: 18.00-25 40PR
Other specifications
Model seriesH
Centre of Gravity4 ft (1,220 mm)
Max. Climbing Ability57 %
StVZO EquipmentNo
Related Posts:
