Among the key figures for the Doosan d25nx plus Forklift (2021-2026) are low total width at 4.23 ft (1,290 mm) and high construction height at 13.9 ft (4,240 mm). Its published lifting height is 9.84 ft (3 m).
Specification profile
Forklift ⢠2021-2026
Total Width: 4.23 ft (1,290 mm)Construction Height: 13.9 ft (4,240 mm)Lifting Height: 9.84 ft (3 m)Centre of Gravity: 19.7 in (500 mm)
4.23 ft (1,290 mm)Total Width
13.9 ft (4,240 mm)Construction Height
9.84 ft (3 m)Lifting Height
19.7 in (500 mm)Centre of Gravity
5,512 lb (2.5 t)Nominal Load at COG
7.64 ft (2.33 m)Turning Radius
VEmission level
KubotaEngine manufacturer
How it compares
Low, average or high?
Turning Radius
Low
7.64 ft (2.33 m)
Low 6.43 ft (1.96 m)Typical 12 ft (3.65 m)High 26.2 ft (8 m)
Turning Radius is well below the typical figure.
Construction Height
High
13.9 ft (4,240 mm)
Low 6.79 ft (2,070 mm)Typical 9.06 ft (2,761 mm)High 14 ft (4,269 mm)
Construction Height is well above the typical figure.
Lifting Height
Low
9.84 ft (3 m)
Low 8.99 ft (2.74 m)Typical 14.9 ft (4.53 m)High 53.5 ft (16.3 m)
Lifting Height is well below the typical figure.
Total Width
Low
4.23 ft (1,290 mm)
Low 3.51 ft (1,070 mm)Typical 6.76 ft (2,059 mm)High 13.9 ft (4,233 mm)
Total Width is well below the typical figure.
Centre of Gravity
Low
19.7 in (500 mm)
Low 19.7 in (500 mm)Typical 27.9 in (709 mm)High 4 ft (1,220 mm)
Centre of Gravity is well below the typical figure.
