Among the key figures for the Doosan g25nx plus forklift (2021-2026) are typical total width at 4.23 ft (1,290 mm) and high construction height at 13.9 ft (4,240 mm). It also has lifting height of 9.84 ft (3 m).
Specification profile
Forklift • 2021-2026
Total Width: 4.23 ft (1,290 mm)Construction Height: 13.9 ft (4,240 mm)Lifting Height: 9.84 ft (3 m)Centre of Gravity: 19.7 in (500 mm)
4.23 ft (1,290 mm)Total Width
13.9 ft (4,240 mm)Construction Height
9.84 ft (3 m)Lifting Height
19.7 in (500 mm)Centre of Gravity
5,512 lb (2.5 t)Nominal Load at COG
7.64 ft (2.33 m)Turning Radius
VEmission level
KubotaEngine manufacturer
How it compares
Low, average or high?
Turning Radius
Average
7.64 ft (2.33 m)
Low 5.91 ft (1.8 m)Typical 7.95 ft (2.42 m)High 12 ft (3.67 m)
Turning Radius is close to the typical figure.
Construction Height
High
13.9 ft (4,240 mm)
Low 6.68 ft (2,035 mm)Typical 7.29 ft (2,221 mm)High 8.4 ft (2,561 mm)
Construction Height is well above the typical figure.
Lifting Height
Below average
9.84 ft (3 m)
Low 7.14 ft (2.17 m)Typical 11.1 ft (3.38 m)High 18 ft (5.5 m)
Lifting Height is below the typical figure.
Total Width
Average
4.23 ft (1,290 mm)
Low 3.1 ft (945 mm)Typical 4.33 ft (1,319 mm)High 6.94 ft (2,115 mm)
Total Width is close to the typical figure.
Centre of Gravity
Average
19.7 in (500 mm)
Low 19.7 in (500 mm)Typical 21.3 in (542 mm)High 24 in (610 mm)
