Caterpillar gp50n forklift Specs (2019-2026)

by
Key specifications for the Caterpillar gp50n forklift (2019-2026) include high engine power at 96.6 hp (72 kW) together with high weight at 15,961 lb (7.24 t). The listed maximum torque is 212 lb-ft (288 Nm).
Specification profile

Forklift • 2019-2026

Weight: 15,961 lb (7.24 t)Engine power: 96.6 hp (72 kW)Engine speed at max torque: 1,200 rpmMaximum torque: 212 lb-ft (288 Nm)
15,961 lb (7.24 t)Weight
96.6 hp (72 kW)Engine power
1,200 rpmEngine speed at max torque
212 lb-ft (288 Nm)Maximum torque
6.45 ft (1,965 mm)Total Width
7.87 ft (2,400 mm)Construction Height
10.8 ft (3.3 m)Lifting Height
22.0/22.5 km/hTravel Speed With / Without Load
How it compares

Low, average or high?

Engine power

High

96.6 hp (72 kW)
Low 33.5 hp (25 kW)Typical 67.5 hp (50.3 kW)High 112 hp (83.8 kW)

Engine power is well above the typical figure.

Weight

High

15,961 lb (7.24 t)
Low 5,644 lb (2.56 t)Typical 12,143 lb (5.51 t)High 26,358 lb (12 t)

Weight is well above the typical figure.

Maximum torque

High

212 lb-ft (288 Nm)
Low 11.8 lb-ft (16 Nm)Typical 154 lb-ft (209 Nm)High 221 lb-ft (300 Nm)

Maximum torque is well above the typical figure.

Turning Radius

Above average

9.48 ft (2.89 m)
Low 5.91 ft (1.8 m)Typical 7.95 ft (2.42 m)High 12 ft (3.67 m)

Turning Radius is above the typical figure.

Construction Height

Above average

7.87 ft (2,400 mm)
Low 6.68 ft (2,035 mm)Typical 7.29 ft (2,221 mm)High 8.4 ft (2,561 mm)

Construction Height is above the typical figure.

Lifting Height

Average

10.8 ft (3.3 m)
Low 7.14 ft (2.17 m)Typical 11.1 ft (3.38 m)High 18 ft (5.5 m)

Lifting Height is close to the typical figure.

Visual overview

Key measurements

Measurements

Related measurements grouped for faster scanning.

Construction Height7.87 ft (2,400 mm)
Total Width6.45 ft (1,965 mm)
Centre of Gravity23.6 in (600 mm)

Measurements

Related measurements grouped for faster scanning.

Lifting Height10.8 ft (3.3 m)
Lowering With Load0.5 m/s
Overview

Model information

Manufacturer Caterpillar
Model gp50n forklift
Category Forklift
Model year / production 2019-2026
Full specifications

Technical details

Performance

Engine power96.6 hp (72 kW)
Maximum torque212 lb-ft (288 Nm)
Engine speed at max torque1,200 rpm
Travel Speed With / Without Load22.0/22.5 km/h

Dimensions

Construction Height7.87 ft (2,400 mm)
Lifting Height10.8 ft (3.3 m)
Total Width6.45 ft (1,965 mm)
Turning Radius9.48 ft (2.89 m)

Capacity & weight

Weight15,961 lb (7.24 t)
Hoisting With / Without Load0.49/0.52 m/s
Lowering With Load0.5 m/s
Nominal Load at COG11,023 lb (5 t)

Engine & drivetrain

Engine typeGCT GK45
Number of cylinders6.0

Setup & fitment

Standard tyresFront: 300-15-18PR / Rear: 7.00-12-14PR

Other specifications

Model seriesGP
Centre of Gravity23.6 in (600 mm)
Max. Climbing Ability26%

Related Posts: