The Komatsu SK818-5 Super Flow skid-steer battery size is Group 24, and it uses a 12-volt electrical system. Its 1000 CCA rating is high for Komatsu skid-steers in this dataset.
ModelSK818-5 Super Flow
BrandKomatsu
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
1000 CCA
Battery size
Group 24
Battery location
See details below
How this battery compares
Compared with other Komatsu skid-steer battery ratings in this dataset.
Cold cranking amps1000 CCA
High
LowAverageHigh
Low 600 CCAMedian 600 CCAHigh 1050 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 24
Cold cranking amps
1000 CCA
RP
Replacement battery
What to match when buying
The best replacement battery for the Komatsu SK818-5 Super Flow skid steer loader is a 12V, Group 31, Deep Cycle battery, which is designed for high performance and reliability. You can find these batteries through Komatsu's distribution network or authorized dealers.
LC
Battery location
Where the battery is mounted
The battery on the Komatsu SK818-5 Super Flow skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specs and replacement information, it's best to consult the owner's manual or contact a Komatsu dealer. manualesdetaller.cl
ID
Model details
Equipment identity
Brand
Komatsu
Model
SK818-5 Super Flow
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common symptoms of a bad battery in a Komatsu SK818-5 Super Flow skid steer loader include difficulty starting the engine, dim or flickering lights, and unresponsive controls. For battery specifications and replacement options, it's best to consult the manufacturer's guidelines or a service manual.
?
What battery size fits the Komatsu SK818-5 Super Flow?
Quick answer
Group 24. Best available fitment is based on closest same-brand/model-family match (SK815-5 Super Flow); confirm tray dimensions, terminal layout, and serial number before ordering.
?
How many CCA does the Komatsu SK818-5 Super Flow need?
Quick answer
The recommended battery for the Komatsu SK818-5 Super Flow skid steer loader typically has a Cold Cranking Amps (CCA) rating of around 800 to 1000 CCA. It's important to check the specific model requirements for the exact specifications.
?
What voltage battery does the Komatsu SK818-5 Super Flow use?
Quick answer
The official battery voltage for the Komatsu SK818-5 Super Flow skid steer loader is 12 volts. For replacement, it's important to check the specific model's manual or consult with a dealer for the correct specifications.
?
Where is the battery on the Komatsu SK818-5 Super Flow?
Quick answer
The battery on the Komatsu SK818-5 Super Flow skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specs and replacement information, it's best to consult the owner's manual or contact a Komatsu dealer. manualesdetaller.cl
?
What is the best replacement battery for the Komatsu SK818-5 Super Flow?
Quick answer
The best replacement battery for the Komatsu SK818-5 Super Flow skid steer loader is a 12V, Group 31, Deep Cycle battery, which is designed for high performance and reliability. You can find these batteries through Komatsu's distribution network or authorized dealers.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Komatsu website for manufacturer information.
