The Gehl SL 4640 SXT skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 650 CCA rating is low for Gehl skid-steers in this dataset.
ModelSL 4640 SXT
BrandGehl
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
650 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other Gehl skid-steer battery ratings in this dataset.
Cold cranking amps650 CCA
Low
LowAverageHigh
Low 105 CCAMedian 800 CCAHigh 950 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
650 CCA
RP
Replacement battery
What to match when buying
Use a heavy-duty 12 V starting battery in BCI Group 31 with about 950 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
LC
Battery location
Where the battery is mounted
The battery on the Gehl SL 4640 SXT skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific replacement details, it's best to consult the owner's manual or contact a local GEHL dealer.
ID
Model details
Equipment identity
Brand
Gehl
Model
SL 4640 SXT
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
To replace the battery on a Gehl SL 4640 SXT skid steer loader, first, disconnect the negative terminal followed by the positive terminal. Then, remove the old battery and install the new one by connecting the positive terminal first, followed by the negative terminal.
!
Bad battery symptoms
Signs the battery may be failing
Common symptoms of a bad battery in a Gehl SL 4640 SXT skid steer loader include difficulty starting the engine, dim lights, and electrical issues. For battery specifications and replacement, refer to the manufacturer's guidelines on. YUMPU nlp.biu.ac.il
?
What battery size fits the Gehl SL 4640 SXT?
Quick answer
Group 31. Best available fitment is based on closest same-brand/model-family match (SL 4635 SX); confirm tray dimensions, terminal layout, and serial number before ordering.
?
How many CCA does the Gehl SL 4640 SXT need?
Quick answer
The recommended battery for the Gehl SL 4640 SXT skid steer loader has a Cold Cranking Amps (CCA) rating of 650. For replacement, ensure to check the specific model compatibility and specifications.
?
What voltage battery does the Gehl SL 4640 SXT use?
Quick answer
12 volts. Skid-steer starting/charging systems for this model family use a 12 V battery system; confirm serial-specific configuration before replacement.
?
Where is the battery on the Gehl SL 4640 SXT?
Quick answer
The battery on the Gehl SL 4640 SXT skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific replacement details, it's best to consult the owner's manual or contact a local GEHL dealer.
?
What is the best replacement battery for the Gehl SL 4640 SXT?
Quick answer
Use a heavy-duty 12 V starting battery in BCI Group 31 with about 950 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Gehl website for manufacturer information.
