The Gehl SL 3825 skid-steer battery size is Group 58, and it uses a 12-volt electrical system. Its 950 CCA rating is high for Gehl skid-steers in this dataset.
ModelSL 3825
BrandGehl
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
950 CCA
Battery size
Group 58
Battery location
See details below
How this battery compares
Compared with other Gehl skid-steer battery ratings in this dataset.
Cold cranking amps950 CCA
High
LowAverageHigh
Low 105 CCAMedian 800 CCAHigh 950 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 58
Cold cranking amps
950 CCA
RP
Replacement battery
What to match when buying
Use a heavy-duty 12 V starting battery in BCI Group 58 with about 950 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
LC
Battery location
Where the battery is mounted
The battery on the Gehl SL3825 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement options, it's best to consult the owner's manual or a parts supplier.
ID
Model details
Equipment identity
Brand
Gehl
Model
SL 3825
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
To replace the battery on a Gehl SL3825 skid steer loader, first, disconnect the negative terminal followed by the positive terminal. Then, remove the old battery and install the new one by connecting the positive terminal first, followed by the negative terminal.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Gehl SL 3825?
Quick answer
The Gehl SL3825 skid steer loader uses a Group 58 battery; replacement batteries are available from Gehl dealers and parts suppliers with same-day shipping options.
?
How many CCA does the Gehl SL 3825 need?
Quick answer
?
What voltage battery does the Gehl SL 3825 use?
Quick answer
The Gehl SL3825 skid steer loader uses a 12-volt battery. For replacement, it's important to check the specific model and year to ensure compatibility.
?
Where is the battery on the Gehl SL 3825?
Quick answer
The battery on the Gehl SL3825 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement options, it's best to consult the owner's manual or a parts supplier.
?
What is the best replacement battery for the Gehl SL 3825?
Quick answer
Use a heavy-duty 12 V starting battery in BCI Group 58 with about 950 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Gehl website for manufacturer information.
