The Gehl RT135 skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 720 CCA rating is average for Gehl skid-steers in this dataset.
How this battery compares
Compared with other Gehl skid-steer battery ratings in this dataset.
Battery specification
Model-specific replacement data
Replacement battery
What to match when buying
The best replacement battery for the Gehl RT135 skid steer loader is typically a 12-volt battery with 950 cold cranking amps (CCA). It's advisable to check the specific model requirements and consider a group 31 battery for optimal performance.
Battery location
Where the battery is mounted
The battery on the Gehl RT135 skid steer loader is located under the operator's seat.
Model details
Equipment identity
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
What battery size fits the Gehl RT135?
Quick answer
The official battery group size for the Gehl RT135 skid steer loader is typically Group 31. For specific replacement options, it's best to consult the manufacturer's specifications or a reliable parts supplier.
How many CCA does the Gehl RT135 need?
Quick answer
720 CCA. Best available fitment is based on closest same-brand/model-family match (R135); an equal-or-higher CCA replacement is acceptable if the physical size and terminals match.
What voltage battery does the Gehl RT135 use?
Quick answer
The Gehl RT135 skid steer loader typically uses a battery with a voltage of 12 volts. For specific replacement options, it's best to consult the manufacturer's specifications or a reliable parts supplier.
Where is the battery on the Gehl RT135?
Quick answer
The battery on the Gehl RT135 skid steer loader is located under the operator's seat.
What is the best replacement battery for the Gehl RT135?
Quick answer
The best replacement battery for the Gehl RT135 skid steer loader is typically a 12-volt battery with 950 cold cranking amps (CCA). It's advisable to check the specific model requirements and consider a group 31 battery for optimal performance.

