The Caterpillar 277D skid-steer battery size is Group 65, and it uses a 12-volt electrical system. Its 800 CCA rating is average for Caterpillar skid-steers in this dataset.
Model277D
BrandCaterpillar
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
800 CCA
Battery size
Group 65
Battery location
See details below
How this battery compares
Compared with other Caterpillar skid-steer battery ratings in this dataset.
Cold cranking amps800 CCA
Average
LowAverageHigh
Low 125 CCAMedian 850 CCAHigh 1400 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 65
Cold cranking amps
800 CCA
RP
Replacement battery
What to match when buying
Use a heavy-duty 12 V starting battery in BCI Group 65 with about 800 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
LC
Battery location
Where the battery is mounted
The battery on the Caterpillar 277D skid steer loader is typically located under the rear left corner of the engine hood.
ID
Model details
Equipment identity
Brand
Caterpillar
Model
277D
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Caterpillar 277D?
Quick answer
Group 65. Best available fitment is based on closest same-brand/model-family match (297D2); confirm tray dimensions, terminal layout, and serial number before ordering.
?
How many CCA does the Caterpillar 277D need?
Quick answer
The recommended battery for the Caterpillar 277D skid steer loader typically has a Cold Cranking Amps (CCA) rating of around 800 CCA. It's important to select a genuine Cat battery to ensure optimal performance and reliability.
?
What voltage battery does the Caterpillar 277D use?
Quick answer
12 volts. Skid-steer starting/charging systems for this model family use a 12 V battery system; confirm serial-specific configuration before replacement.
?
Where is the battery on the Caterpillar 277D?
Quick answer
The battery on the Caterpillar 277D skid steer loader is typically located under the rear left corner of the engine hood.
?
What is the best replacement battery for the Caterpillar 277D?
Quick answer
Use a heavy-duty 12 V starting battery in BCI Group 65 with about 800 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Caterpillar website for manufacturer information.
