The Caterpillar 246D skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 900 CCA rating is average for Caterpillar skid-steers in this dataset.
Model246D
BrandCaterpillar
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
900 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other Caterpillar skid-steer battery ratings in this dataset.
Cold cranking amps900 CCA
Average
LowAverageHigh
Low 125 CCAMedian 850 CCAHigh 1400 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
900 CCA
RP
Replacement battery
What to match when buying
The Cat part 230-6368 is a 12-volt, 65 BCI heavy-duty maintenance-free battery with 850 CCA designed for Cat skid steer loaders, including the 246D model.
LC
Battery location
Where the battery is mounted
The battery on the Caterpillar 246D skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement instructions, you can refer to the service manual or the Cat website.
ID
Model details
Equipment identity
Brand
Caterpillar
Model
246D
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common symptoms of a bad battery in a Caterpillar 246D skid steer loader include the engine cranking too slowly to start, dim or flickering lights, and alert indicators coming on. For battery replacement, it's important to select genuine Cat batteries to ensure optimal performance.
?
What battery size fits the Caterpillar 246D?
Quick answer
Group 31. Best available fitment is based on closest same-brand/model-family match (236D); confirm tray dimensions, terminal layout, and serial number before ordering.
?
How many CCA does the Caterpillar 246D need?
Quick answer
The recommended battery for the Caterpillar 246D Skid Steer Loader is a 12-Volt heavy-duty maintenance-free battery with 900 Cold Cranking Amps (CCA). This specification ensures optimal performance for the machine in tough environments.
?
What voltage battery does the Caterpillar 246D use?
Quick answer
12 volts. Skid-steer starting/charging systems for this model family use a 12 V battery system; confirm serial-specific configuration before replacement.
?
Where is the battery on the Caterpillar 246D?
Quick answer
The battery on the Caterpillar 246D skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement instructions, you can refer to the service manual or the Cat website.
?
What is the best replacement battery for the Caterpillar 246D?
Quick answer
The Cat part 230-6368 is a 12-volt, 65 BCI heavy-duty maintenance-free battery with 850 CCA designed for Cat skid steer loaders, including the 246D model.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Caterpillar website for manufacturer information.
