The Caterpillar 216B Series 3 skid-steer battery size is Group 4D, and it uses a 12-volt electrical system. Its 125 CCA rating is low for Caterpillar skid-steers in this dataset.
Model216B Series 3
BrandCaterpillar
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
125 CCA
Battery size
Group 4D
Battery location
See details below
How this battery compares
Compared with other Caterpillar skid-steer battery ratings in this dataset.
Cold cranking amps125 CCA
Low
LowAverageHigh
Low 125 CCAMedian 850 CCAHigh 1400 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 4D
Cold cranking amps
125 CCA
RP
Replacement battery
What to match when buying
Cat-branded batteries for the 216B Series 3 are engineered to Caterpillar’s heavy-duty standards for vibration resistance and extreme temperatures, and users report long service life in skid-steer applications.
LC
Battery location
Where the battery is mounted
The battery on the Caterpillar 216B Series 3 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery replacement instructions, refer to the maintenance checklist provided by Caterpillar.
ID
Model details
Equipment identity
Brand
Caterpillar
Model
216B Series 3
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
To replace the battery on a Caterpillar 216B Series 3 skid steer loader, first remove the old battery and then install the new battery. Ensure to follow all safety warnings and prepare your work area before starting the replacement process.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Caterpillar 216B Series 3?
Quick answer
The official battery group size for the Caterpillar 216B Series 3 skid steer loader is Group 4D. For replacement, you can consider Cat part 153-5710, which is a 12-Volt heavy-duty maintenance-free battery suitable for this model.
?
How many CCA does the Caterpillar 216B Series 3 need?
Quick answer
The Caterpillar 216B Series 3 skid steer loader uses a 12-volt, Group 4D battery with 1,125 cold cranking amps (CCA) as the official replacement, such as Cat part 153-5700 or 11R-2196.
?
What voltage battery does the Caterpillar 216B Series 3 use?
Quick answer
The Caterpillar 216B Series 3 skid steer loader uses a 12-volt battery. For replacement, you can find various heavy-duty maintenance-free options that fit this specification.
?
Where is the battery on the Caterpillar 216B Series 3?
Quick answer
The battery on the Caterpillar 216B Series 3 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery replacement instructions, refer to the maintenance checklist provided by Caterpillar.
?
What is the best replacement battery for the Caterpillar 216B Series 3?
Quick answer
Cat-branded batteries for the 216B Series 3 are engineered to Caterpillar’s heavy-duty standards for vibration resistance and extreme temperatures, and users report long service life in skid-steer applications.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Caterpillar website for manufacturer information.
