The Bobcat S770 skid-steer battery size is Group 24, and it uses a 12-volt electrical system. Its 700 CCA rating is average for Bobcat skid-steers in this dataset.
ModelS770
BrandBobcat
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
700 CCA
Battery size
Group 24
Battery location
See details below
How this battery compares
Compared with other Bobcat skid-steer battery ratings in this dataset.
Cold cranking amps700 CCA
Average
LowAverageHigh
Low 190 CCAMedian 650 CCAHigh 1000 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 24
Cold cranking amps
700 CCA
RP
Replacement battery
What to match when buying
The Bobcat S770 skid-steer loader uses a Group 31 battery with 1,000 cold-cranking amps (CCA) as the recommended replacement.
LC
Battery location
Where the battery is mounted
The battery on the Bobcat S770 skid-steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement details, it's best to refer to the operation and maintenance manual for your model.
ID
Model details
Equipment identity
Brand
Bobcat
Model
S770
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Bobcat S770?
Quick answer
The official battery group size for the Bobcat S770 skid steer loader is Group 24 / N50ZZ. For replacement, look for batteries that meet the specifications of this group size.
?
How many CCA does the Bobcat S770 need?
Quick answer
The recommended battery for the Bobcat S770 skid steer loader typically requires a cold cranking amps (CCA) rating of around 600 to 700 CCA. It's important to use a battery specifically designed for Bobcat equipment to ensure optimal performance.
?
What voltage battery does the Bobcat S770 use?
Quick answer
The Bobcat S770 skid steer loader typically uses a 12-volt battery. For specific replacement options, it's best to consult the owner's manual or contact a Bobcat dealer for the exact specifications.
?
Where is the battery on the Bobcat S770?
Quick answer
The battery on the Bobcat S770 skid-steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement details, it's best to refer to the operation and maintenance manual for your model.
?
What is the best replacement battery for the Bobcat S770?
Quick answer
The Bobcat S770 skid-steer loader uses a Group 31 battery with 1,000 cold-cranking amps (CCA) as the recommended replacement.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Bobcat website for manufacturer information.
