The Bobcat S 330 skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 600 CCA rating is average for Bobcat skid-steers in this dataset.
ModelS 330
BrandBobcat
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
600 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other Bobcat skid-steer battery ratings in this dataset.
Cold cranking amps600 CCA
Average
LowAverageHigh
Low 190 CCAMedian 650 CCAHigh 1000 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
600 CCA
RP
Replacement battery
What to match when buying
The best replacement battery for the Bobcat S330 skid steer loader is a Bobcat heavy-duty battery, specifically designed to deliver the necessary power and withstand tough conditions. These batteries feature reinforced plates for full cranking power and are tailored for Bobcat equipment.
LC
Battery location
Where the battery is mounted
The battery on the Bobcat S330 skid-steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement details, it's best to consult the Bobcat parts catalog or the owner's manual.
ID
Model details
Equipment identity
Brand
Bobcat
Model
S 330
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Bobcat S 330?
Quick answer
The official battery group size for the Bobcat S330 Skid-Steer Loader is Group 31. For replacement, it's important to ensure the battery meets the specifications outlined in the owner's manual.
?
How many CCA does the Bobcat S 330 need?
Quick answer
The Bobcat S330 skid steer loader requires a battery with a minimum of 600 cold cranking amps (CCA). For optimal performance, it's recommended to use a Bobcat heavy-duty battery specifically designed for their equipment.
?
What voltage battery does the Bobcat S 330 use?
Quick answer
The official battery voltage for the Bobcat S330 skid-steer loader is 12 volts. For replacement, it's best to consult the Bobcat parts catalog or your local dealer for the specific battery model.
?
Where is the battery on the Bobcat S 330?
Quick answer
The battery on the Bobcat S330 skid-steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement details, it's best to consult the Bobcat parts catalog or the owner's manual.
?
What is the best replacement battery for the Bobcat S 330?
Quick answer
The best replacement battery for the Bobcat S330 skid steer loader is a Bobcat heavy-duty battery, specifically designed to deliver the necessary power and withstand tough conditions. These batteries feature reinforced plates for full cranking power and are tailored for Bobcat equipment.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Bobcat website for manufacturer information.
