The Bobcat S 150 skid-steer battery size is Group 24, and it uses a 12-volt electrical system. Its 650 CCA rating is average for Bobcat skid-steers in this dataset.
ModelS 150
BrandBobcat
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
650 CCA
Battery size
Group 24
Battery location
See details below
How this battery compares
Compared with other Bobcat skid-steer battery ratings in this dataset.
Cold cranking amps650 CCA
Average
LowAverageHigh
Low 190 CCAMedian 650 CCAHigh 1000 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 24
Cold cranking amps
650 CCA
RP
Replacement battery
What to match when buying
The recommended replacement battery for a Bobcat S150 skid-steer loader is the Hardcore HCC24SC, a Group 24 sealed maintenance-free battery with 700 cold cranking amps and 82 Ah capacity, designed for severe-service applications.
LC
Battery location
Where the battery is mounted
Family-match guidance: The Bobcat S160 skid-steer loader battery is located under the operator's seat on the left side of the machine. Verify the exact access panel/compartment for the machine serial number before service.
ID
Model details
Equipment identity
Brand
Bobcat
Model
S 150
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Bobcat S 150?
Quick answer
The official battery group size for the Bobcat S150 skid steer loader is Group 24. For replacement, it's important to ensure the battery meets the specifications required for optimal performance.
?
How many CCA does the Bobcat S 150 need?
Quick answer
The recommended battery for the Bobcat S150 skid steer loader has a Cold Cranking Amps (CCA) rating of 650. For replacement, ensure to check the specific model and compatibility with your loader.
?
What voltage battery does the Bobcat S 150 use?
Quick answer
12 volts. Skid-steer starting/charging systems for this model family use a 12 V battery system; confirm serial-specific configuration before replacement.
?
Where is the battery on the Bobcat S 150?
Quick answer
Family-match guidance: The Bobcat S160 skid-steer loader battery is located under the operator's seat on the left side of the machine. Verify the exact access panel/compartment for the machine serial number before service.
?
What is the best replacement battery for the Bobcat S 150?
Quick answer
The recommended replacement battery for a Bobcat S150 skid-steer loader is the Hardcore HCC24SC, a Group 24 sealed maintenance-free battery with 700 cold cranking amps and 82 Ah capacity, designed for severe-service applications.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Bobcat website for manufacturer information.
