The Bobcat Earthforce S18 skid-steer battery size is Group 24, and it uses a 12-volt electrical system. Its 650 CCA rating is average for Bobcat skid-steers in this dataset.
ModelEarthforce S18
BrandBobcat
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
650 CCA
Battery size
Group 24
Battery location
See details below
How this battery compares
Compared with other Bobcat skid-steer battery ratings in this dataset.
Cold cranking amps650 CCA
Average
LowAverageHigh
Low 190 CCAMedian 650 CCAHigh 1000 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 24
Cold cranking amps
650 CCA
RP
Replacement battery
What to match when buying
The best replacement battery for the Bobcat Earthforce S18 skid steer loader is a Bobcat heavy-duty battery, specifically designed to deliver the necessary power and withstand harsh conditions. These batteries feature reinforced plates and are tailored for Bobcat equipment to ensure optimal performance.
LC
Battery location
Where the battery is mounted
The battery on the Bobcat Earthforce S18 skid-steer loader is located in an easily accessible area for maintenance and servicing, with full access to the battery without needing to raise the lift arms.
ID
Model details
Equipment identity
Brand
Bobcat
Model
Earthforce S18
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Bobcat Earthforce S18?
Quick answer
The official battery group size for the Bobcat Earthforce S18 skid-steer loader is Group 24 / N50ZZ. For replacement, it's recommended to use a Bobcat heavy-duty battery designed specifically for Bobcat equipment.
?
How many CCA does the Bobcat Earthforce S18 need?
Quick answer
The recommended battery for the Bobcat Earthforce S18 skid steer loader has a Cold Cranking Amps (CCA) rating of 650 CCA. This battery is specifically designed to fit various Bobcat models, ensuring optimal performance.
?
What voltage battery does the Bobcat Earthforce S18 use?
Quick answer
The Bobcat Earthforce S18 skid-steer loader typically uses a 12-volt battery. For specific battery specifications and replacement options, it's best to consult the owner's manual or contact a Bobcat dealer directly.
?
Where is the battery on the Bobcat Earthforce S18?
Quick answer
The battery on the Bobcat Earthforce S18 skid-steer loader is located in an easily accessible area for maintenance and servicing, with full access to the battery without needing to raise the lift arms.
?
What is the best replacement battery for the Bobcat Earthforce S18?
Quick answer
The best replacement battery for the Bobcat Earthforce S18 skid steer loader is a Bobcat heavy-duty battery, specifically designed to deliver the necessary power and withstand harsh conditions. These batteries feature reinforced plates and are tailored for Bobcat equipment to ensure optimal performance.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Bobcat website for manufacturer information.
