The Bobcat 873 G H AHCS skid-steer battery size is Group 24, and it uses a 12-volt electrical system. Its 600 CCA rating is average for Bobcat skid-steers in this dataset.
Model873 G H AHCS
BrandBobcat
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
600 CCA
Battery size
Group 24
Battery location
See details below
How this battery compares
Compared with other Bobcat skid-steer battery ratings in this dataset.
Cold cranking amps600 CCA
Average
LowAverageHigh
Low 190 CCAMedian 650 CCAHigh 1000 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 24
Cold cranking amps
600 CCA
RP
Replacement battery
What to match when buying
The Bobcat 873 G H AHCS skid steer loader typically requires a Group 24 battery with a minimum of 600 cold cranking amps (CCA) for optimal performance. It's advisable to check with a Bobcat dealer or a trusted battery supplier for the best options available.
LC
Battery location
Where the battery is mounted
The battery on the Bobcat 873 G AHCS skid steer loader is located under the operator's seat.
ID
Model details
Equipment identity
Brand
Bobcat
Model
873 G H AHCS
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Bobcat provides a service video demonstrating how to replace hydraulic fluid and filters on Pro Model and R-Series skid-steer loaders and compact track loaders, which includes maintenance steps applicable to related systems like battery replacement procedures shown in their service content.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Bobcat 873 G H AHCS?
Quick answer
The official Bobcat 873 G H AHCS skid-steer loader uses a Group 24 (N50ZZ) battery, such as the Hardcore HCC24SC, which is a sealed maintenance-free battery with 82 Ah capacity and 140 minutes reserve capacity.
?
How many CCA does the Bobcat 873 G H AHCS need?
Quick answer
Bobcat heavy-duty batteries for skid-steer loaders like the 873 G H AHCS are designed with full-size reinforced plates and lead-welded post seals for extreme conditions.
?
What voltage battery does the Bobcat 873 G H AHCS use?
Quick answer
The official Bobcat 873 G High-AHCs skid-steer loader uses a 12-volt battery.
?
Where is the battery on the Bobcat 873 G H AHCS?
Quick answer
The battery on the Bobcat 873 G AHCS skid steer loader is located under the operator's seat.
?
What is the best replacement battery for the Bobcat 873 G H AHCS?
Quick answer
The Bobcat 873 G H AHCS skid steer loader typically requires a Group 24 battery with a minimum of 600 cold cranking amps (CCA) for optimal performance. It's advisable to check with a Bobcat dealer or a trusted battery supplier for the best options available.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Bobcat website for manufacturer information.
