Weight summary
The published New Holland TN65 weight is 4,665–5,775 lb (2,116–2,619 kg). The primary figure used for comparisons is 4,665 lb (2,116 kg), listed as 2WD ROPS Shipping. The published configurations span 1,110 lb, a 23.8% difference from the lightest listed setup.
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Average
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | New Holland |
|---|---|
| Model | TN65 |
| Category | Farm tractor |
| Model years | 1998 – 2003 |
| Tractor type | Utility Tractor |
| Published weight variants | 6 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| 2WD ROPS Shipping | — | 4,665 lb | 2,116 kg | 2.33 | — |
| 4WD ROPS Shipping | — | 5,140 lb | 2,331 kg | 2.57 | — |
| 2WD cab Shipping | — | 5,030 lb | 2,281 kg | 2.52 | — |
| 4WD Cab Shipping | — | 5,630 lb | 2,553 kg | 2.81 | — |
| SuperSteer ROPS Shipping | — | 5,335 lb | 2,419 kg | 2.67 | — |
| SuperSteer Cab Shipping | — | 5,775 lb | 2,619 kg | 2.89 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- Massey Ferguson 254S (4674 lb)
- Kubota M7040 (4675 lb)
- Ford 4100 (4655 lb)
- Allis Chalmers 160 (4680 lb)
- Allis Chalmers 6040 (4680 lb)
Closest comparable tractors
- John Deere 1030 (4720 lb)
- Ford 4110 (4715 lb, 56.8 hp)
- John Deere 1020 (4730 lb)
- International Harvester 350 (4595 lb)
- Yanmar YM359 (4597 lb, 58.9 hp)
New Holland TN65 weight FAQ
How much does a New Holland TN65 weigh?
The New Holland TN65 weighs 4,665 lb (2,116 kg) using the published 2WD ROPS Shipping figure. Across the published configurations on this page, weight ranges from 4,665 to 5,775 lb (2,116 to 2,619 kg).
How much heavier is the 4WD New Holland TN65 than the 2WD model?
Published 2WD weight is 4,665–5,030 lb (2,116–2,282 kg), while published 4WD weight is 5,140–5,630 lb (2,331–2,554 kg). On a midpoint basis, the published 4WD configurations are about 538 lb heavier. Tires, transmission and other configuration differences can also affect the number.
Is the New Holland TN65 heavy or light for a utility tractor?
It is close to average for its peer group. The representative figure sits at about the 51st percentile, near the middle of the utility tractor peers. That puts it in the average range for this comparison. It is 598 lb lighter than the peer-group average of 5,263 lb.
How wide is the New Holland TN65 for transport?
The maximum published tractor width is 67.2 in (5.6 ft). That is 34.8 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the New Holland TN65 weight-to-horsepower ratio?
Using the page’s representative 4,665 lb weight and 57 hp power figure, the tractor carries about 81.8 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the New Holland TN65 weigh?
The representative published weight is about 2.33 US tons, while the full published range is 2.33–2.89 US tons. Loaded transport weight can be higher than the tractor specification.

