Weight summary
The published New Holland PowerStar 100 weight is 6,988–8,157 lb (3,169–3,700 kg). The primary figure used for comparisons is 6,988 lb (3,169 kg), listed as 2WD ROPS. The published configurations span 1,169 lb, a 16.7% difference from the lightest listed setup.
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Heavy
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | New Holland |
|---|---|
| Model | PowerStar 100 |
| Category | Farm tractor |
| Model years | 2018 – 2027 |
| Tractor type | Utility Tractor |
| Published weight variants | 4 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| 2WD ROPS | — | 6,988 lb | 3,169 kg | 3.49 | — |
| 4WD ROPS | — | 7,672 lb | 3,480 kg | 3.84 | — |
| 2WD Cab | — | 7,473 lb | 3,389 kg | 3.74 | — |
| 4WD Cab | — | 8,157 lb | 3,700 kg | 4.08 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- New Holland PowerStar 110 (6988 lb)
- New Holland PowerStar 120 (6988 lb)
- New Holland PowerStar 90 (6988 lb)
- Case IH Farmall 100C (6989 lb)
- Case IH Farmall 110C (6989 lb)
Closest comparable tractors
- Case IH Farmall 100C (6989 lb, 99 hp)
- New Holland T4.100 (6989 lb, 99 hp)
- New Holland TL5060 (7022 lb, 100 hp)
- J.I. Case 1210 (7100 lb)
- John Deere 5603 (7145 lb, 99 hp)
New Holland PowerStar 100 weight FAQ
How much does a New Holland PowerStar 100 weigh?
The New Holland PowerStar 100 weighs 6,988 lb (3,169 kg) using the published 2WD ROPS figure. Across the published configurations on this page, weight ranges from 6,988 to 8,157 lb (3,169 to 3,700 kg).
How much heavier is the 4WD New Holland PowerStar 100 than the 2WD model?
Published 2WD weight is 6,988–7,473 lb (3,170–3,390 kg), while published 4WD weight is 7,672–8,157 lb (3,480–3,700 kg). On a midpoint basis, the published 4WD configurations are about 684 lb heavier. Tires, transmission and other configuration differences can also affect the number.
Is the New Holland PowerStar 100 a heavy utility tractor?
Yes. The representative figure sits at about the 73rd percentile, heavier than roughly 73% of the utility tractor peers. That puts it in the heavy range for this comparison. It is 1,725 lb heavier than the peer-group average of 5,263 lb.
How wide is the New Holland PowerStar 100 for transport?
The maximum published tractor width is 75.7 in (6.3 ft). That is 26.3 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the New Holland PowerStar 100 weight-to-horsepower ratio?
Using the page’s representative 6,988 lb weight and 99 hp power figure, the tractor carries about 70.6 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the New Holland PowerStar 100 weigh?
The representative published weight is about 3.49 US tons, while the full published range is 3.49–4.08 US tons. Loaded transport weight can be higher than the tractor specification.
