Weight summary
The published John Deere 3130 weight is 8,200 lb (3,719 kg). The primary figure used for comparisons is 8,200 lb (3,719 kg), listed as Weight.
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Heavy
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | John Deere |
|---|---|
| Model | 3130 |
| Category | Farm tractor |
| Model years | 1973 – 1979 |
| Tractor type | Utility Tractor |
| Published weight variants | 1 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| Weight | — | 8,200 lb | 3,719 kg | 4.1 | — |
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- Farmall Hydro 70 (8200 lb)
- International Harvester Hydro 70 (8200 lb)
- Massey Ferguson 4235 (8185 lb)
- Kubota M10570 (8179 lb)
- Kubota M10570 (8179 lb)
Closest comparable tractors
- John Deere 5095M (8140 lb, 95 hp)
- New Holland TL100 (8135 lb, 95 hp)
- John Deere 5100M (8157 lb, 100 hp)
- Kubota M100G (8080 lb, 98.7 hp)
- Case IH C100 (8280 lb, 100 hp)
John Deere 3130 weight FAQ
How much does a John Deere 3130 weigh?
The John Deere 3130 weighs 8,200 lb (3,719 kg) using the primary published weight figure.
Is the John Deere 3130 a heavy utility tractor?
Yes. The representative figure sits at about the 82nd percentile, heavier than roughly 82% of the utility tractor peers. That puts it in the heavy range for this comparison. It is 2,937 lb heavier than the peer-group average of 5,263 lb.
How wide is the John Deere 3130 for transport?
The maximum published tractor width is 81.8 in (6.8 ft). That is 20.2 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the John Deere 3130 weight-to-horsepower ratio?
Using the page’s representative 8,200 lb weight and 96.5 hp power figure, the tractor carries about 85 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the John Deere 3130 weigh?
The representative published weight is about 4.1 US tons, while the full published range is 4.1 US tons. Loaded transport weight can be higher than the tractor specification.
