Weight summary
The published John Deere 1520 weight is 4,490–6,970 lb (2,036–3,161 kg). The primary figure used for comparisons is 5,770 lb (2,617 kg), listed as Gasoline Operating. The published configurations span 2,480 lb, a 55.2% difference from the lightest listed setup.
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Average
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | John Deere |
|---|---|
| Model | 1520 |
| Category | Farm tractor |
| Model years | 1968 – 1972 |
| Tractor type | Utility Tractor |
| Published weight variants | 5 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| Gasoline Shipping | — | 4,490 lb | 2,036 kg | 2.25 | — |
| Diesel Shipping | — | 4,550 lb | 2,063 kg | 2.27 | — |
| Gasoline Operating | — | 5,770 lb | 2,617 kg | 2.88 | — |
| Diesel Operating | — | 5,855 lb | 2,655 kg | 2.93 | — |
| Ballasted | — | 6,970 lb | 3,161 kg | 3.48 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- Case IH Farmall 100N (5772 lb)
- Case IH Farmall 110N (5772 lb)
- International Harvester T-4 (5767 lb)
- Kubota M5970 (5765 lb)
- Case IH Farmall 65C (5776 lb)
Closest comparable tractors
- John Deere 1950 (5798 lb)
- John Deere 2355 (5965 lb)
- John Deere 2130 (5980 lb)
- Kubota M7500 (5980 lb)
- Massey Ferguson 275 (5560 lb)
John Deere 1520 weight FAQ
How much does a John Deere 1520 weigh?
The John Deere 1520 weighs 5,770 lb (2,617 kg) using the published Gasoline Operating figure. Across the published configurations on this page, weight ranges from 4,490 to 6,970 lb (2,036 to 3,161 kg).
What is the operating weight of the John Deere 1520 compared with shipping weight?
Published operating weight is 5,770–5,855 lb (2,617–2,656 kg), versus 4,490–4,550 lb (2,037–2,064 kg) for shipping weight. That is roughly 1,280 lb (28.5%) more than shipping weight. Operating weight is generally the more useful starting point when estimating a ready-to-use tractor.
How much does the John Deere 1520 weigh with ballast?
The published ballasted weight is 6,970 lb (3,162 kg). That is up to 2,480 lb (55.2%) above the lightest published configuration. Ballast can therefore change the practical hauling and ground-pressure picture substantially on this model.
Is the John Deere 1520 heavy or light for a utility tractor?
It is close to average for its peer group. The representative figure sits at about the 63rd percentile, near the middle of the utility tractor peers. That puts it in the average range for this comparison. It is 507 lb heavier than the peer-group average of 5,263 lb.
How wide is the John Deere 1520 for transport?
The maximum published tractor width is 69.2 in (5.8 ft). That is 32.8 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the John Deere 1520 weight-to-horsepower ratio?
Using the page’s representative 5,770 lb weight and 47.9 hp power figure, the tractor carries about 120.6 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.



