Weight summary
The published John Deere 620 weight is 5,858–8,769 lb (2,657–3,977 kg). The primary figure used for comparisons is 6,800 lb (3,084 kg), listed as Operating. The published configurations span 2,911 lb, a 49.7% difference from the lightest listed setup.
How this weight compares
Row-Crop Tractor peers · 510 tractors in the benchmark.
Light
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | John Deere |
|---|---|
| Model | 620 |
| Category | Farm tractor |
| Model years | 1956 – 1958 |
| Tractor type | Row-Crop Tractor |
| Published weight variants | 3 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| Shipping | — | 5,858 lb | 2,657 kg | 2.93 | — |
| Operating | — | 6,800 lb | 3,084 kg | 3.4 | — |
| Ballasted | — | 8,769 lb | 3,977 kg | 4.38 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- Ford 6610 (6800 lb)
- John Deere 2550 (6800 lb)
- John Deere 5310 (6800 lb)
- John Deere 5410 (6800 lb)
- New Holland Workmaster 55 (6800 lb)
Closest comparable tractors
- John Deere 720 (6790 lb)
- John Deere 70 (6538 lb)
- Farmall 450 (6519 lb, 51.25 hp)
- Farmall 544 (7195 lb, 52 hp)
- John Deere 3010 (6500 lb, 55.09 hp)
John Deere 620 weight FAQ
How much does a John Deere 620 weigh?
The John Deere 620 weighs 6,800 lb (3,084 kg) using the published Operating figure. Across the published configurations on this page, weight ranges from 5,858 to 8,769 lb (2,657 to 3,977 kg).
What is the operating weight of the John Deere 620 compared with shipping weight?
Published operating weight is 6,800 lb (3,084 kg), versus 5,858 lb (2,657 kg) for shipping weight. That is roughly 942 lb (16.1%) more than shipping weight. Operating weight is generally the more useful starting point when estimating a ready-to-use tractor.
How much does the John Deere 620 weigh with ballast?
The published ballasted weight is 8,769 lb (3,978 kg). That is up to 2,911 lb (49.7%) above the lightest published configuration. Ballast can therefore change the practical hauling and ground-pressure picture substantially on this model.
Is the John Deere 620 a lightweight row-crop tractor?
Yes. The representative figure sits at about the 16th percentile, lighter than roughly 84% of the row-crop tractor peers. That puts it in the light range for this comparison. It is 7,206 lb lighter than the peer-group average of 14,006 lb.
How wide is the John Deere 620 for transport?
The maximum published tractor width is 86.6 in (7.2 ft). That is 15.4 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the John Deere 620 weight-to-horsepower ratio?
Using the page’s representative 6,800 lb weight and 48 hp power figure, the tractor carries about 141.7 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
