Weight summary
The published International Harvester T-6 weight is 6,930–7,500 lb (3,143–3,402 kg). The primary figure used for comparisons is 7,500 lb (3,402 kg), listed as Operating. The published configurations span 570 lb, a 8.2% difference from the lightest listed setup.
How this weight compares
All tractors in this dataset · 2,282 tractors in the benchmark.
Average
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | International Harvester |
|---|---|
| Model | T-6 |
| Category | Farm tractor |
| Model years | 1940 – 1969 |
| Tractor type | Farm tractor |
| Published weight variants | 3 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| Shipping | narrow-gauge | 6,930 lb | 3,143 kg | 3.46 | — |
| Shipping | wide-gauge | 7,130 lb | 3,234 kg | 3.56 | — |
| Operating | — | 7,500 lb | 3,402 kg | 3.75 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- J.I. Case 600 (7500 lb)
- John Deere 2750 (7500 lb)
- Yanmar AF880 (7496 lb)
- Yanmar AF890 (7496 lb)
- Massey Ferguson 4707 (7478 lb)
Closest comparable tractors
- John Deere 1641 (7409 lb)
- J.I. Case 610 (7625 lb)
- Allis Chalmers H3 (7395 lb, 32.11 hp)
- International Harvester TD-6 (7280 lb, 31.75 hp)
- Allis Chalmers HD3 (7645 lb, 32.53 hp)
International Harvester T-6 weight FAQ
How much does an International Harvester T-6 weigh?
The International Harvester T-6 weighs 7,500 lb (3,402 kg) using the published Operating figure. Across the published configurations on this page, weight ranges from 6,930 to 7,500 lb (3,143 to 3,402 kg).
What is the operating weight of the International Harvester T-6 compared with shipping weight?
Published operating weight is 7,500 lb (3,402 kg), versus 6,930–7,130 lb (3,143–3,234 kg) for shipping weight. That is roughly 570 lb (8.2%) more than shipping weight. Operating weight is generally the more useful starting point when estimating a ready-to-use tractor.
Is the International Harvester T-6 heavy or light for a farm tractor?
It is close to average for its peer group. The representative figure sits at about the 57th percentile, near the middle of the all tractors in this dataset. That puts it in the average range for this comparison. It is 2,427 lb lighter than the peer-group average of 9,927 lb.
How wide is the International Harvester T-6 for transport?
The maximum published tractor width is 63 in (5.2 ft). That is 39 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the International Harvester T-6 weight-to-horsepower ratio?
Using the page’s representative 7,500 lb weight and 30.9 hp power figure, the tractor carries about 243.1 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the International Harvester T-6 weigh?
The representative published weight is about 3.75 US tons, while the full published range is 3.46–3.75 US tons. Loaded transport weight can be higher than the tractor specification.

