Weight summary
The published Ford 2910 weight is 4,413–6,000 lb (2,001–2,721 kg). The primary figure used for comparisons is 4,413 lb (2,001 kg), listed as 2WD Operating. The published configurations span 1,587 lb, a 36% difference from the lightest listed setup.
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Average
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | Ford |
|---|---|
| Model | 2910 |
| Category | Farm tractor |
| Model years | 1983 – 1989 |
| Tractor type | Utility Tractor |
| Published weight variants | 3 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| 2WD Operating | — | 4,413 lb | 2,001 kg | 2.21 | — |
| 4WD Operating | — | 4,948 lb | 2,244 kg | 2.47 | — |
| Ballasted | — | 6,000 lb | 2,721 kg | 3 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- Ford 3600 (4415 lb)
- Allis Chalmers 5050 (4410 lb)
- Kubota L5450 (4410 lb)
- Ford 3055 (4409 lb)
- John Deere 3045B (4409 lb)
Closest comparable tractors
- Massey Ferguson 1190 (4376 lb)
- John Deere 3045B (4409 lb, 45 hp)
- Massey Ferguson 1180 (4354 lb)
- J.I. Case 350 (4275 lb)
- International Harvester 504 (4458 lb, 46 hp)
Ford 2910 weight FAQ
How much does a Ford 2910 weigh?
The Ford 2910 weighs 4,413 lb (2,001 kg) using the published 2WD Operating figure. Across the published configurations on this page, weight ranges from 4,413 to 6,000 lb (2,001 to 2,721 kg).
How much heavier is the 4WD Ford 2910 than the 2WD model?
Published 2WD weight is 4,413 lb (2,002 kg), while published 4WD weight is 4,948 lb (2,244 kg). On a midpoint basis, the published 4WD configurations are about 535 lb heavier. Tires, transmission and other configuration differences can also affect the number.
What is the operating weight of the Ford 2910?
The published operating weight is 4,413–4,948 lb (2,002–2,244 kg). This is usually a more useful real-world figure than a bare shipping specification, although ballast, loader, fuel, implements and tire setup can still increase actual working weight.
How much does the Ford 2910 weigh with ballast?
The published ballasted weight is 6,000 lb (2,722 kg). That is up to 1,587 lb (36%) above the lightest published configuration. Ballast can therefore change the practical hauling and ground-pressure picture substantially on this model.
Is the Ford 2910 heavy or light for a utility tractor?
It is close to average for its peer group. The representative figure sits at about the 50th percentile, near the middle of the utility tractor peers. That puts it in the average range for this comparison. It is 850 lb lighter than the peer-group average of 5,263 lb.
How wide is the Ford 2910 for transport?
The maximum published tractor width is 68.4 in (5.7 ft). That is 33.6 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
