Weight summary
The published Ford 9N weight is 2,140–3,375 lb (970–1,530 kg). The primary figure used for comparisons is 2,900 lb (1,315 kg), listed as Operating. The published configurations span 1,235 lb, a 57.7% difference from the lightest listed setup.
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Average
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | Ford |
|---|---|
| Model | 9N |
| Category | Farm tractor |
| Model years | 1939 – 1942 |
| Tractor type | Utility Tractor |
| Published weight variants | 3 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| Shipping | — | 2,140 lb | 970 kg | 1.07 | — |
| Operating | — | 2,900 lb | 1,315 kg | 1.45 | — |
| Ballasted | — | 3,375 lb | 1,530 kg | 1.69 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- International Harvester D-324 (2900 lb)
- John Deere 3033R (2900 lb)
- John Deere 3039R (2900 lb)
- John Deere 3046R (2900 lb)
- John Deere 40 (2900 lb)
Closest comparable tractors
- John Deere 4410 (2900 lb)
- John Deere 3120 (3000 lb)
- Kubota L2850 (2790 lb)
- Kubota L3250 (2750 lb)
- Case IH Farmall 35A Series II (3067 lb)
Ford 9N weight FAQ
How much does a Ford 9N weigh?
The Ford 9N weighs 2,900 lb (1,315 kg) using the published Operating figure. Across the published configurations on this page, weight ranges from 2,140 to 3,375 lb (970 to 1,530 kg).
What is the operating weight of the Ford 9N compared with shipping weight?
Published operating weight is 2,900 lb (1,315 kg), versus 2,140 lb (971 kg) for shipping weight. That is roughly 760 lb (35.5%) more than shipping weight. Operating weight is generally the more useful starting point when estimating a ready-to-use tractor.
How much does the Ford 9N weigh with ballast?
The published ballasted weight is 3,375 lb (1,531 kg). That is up to 1,235 lb (57.7%) above the lightest published configuration. Ballast can therefore change the practical hauling and ground-pressure picture substantially on this model.
Is the Ford 9N heavy or light for a utility tractor?
It is close to average for its peer group. The representative figure sits at about the 30th percentile, near the middle of the utility tractor peers. That puts it in the average range for this comparison. It is 2,363 lb lighter than the peer-group average of 5,263 lb.
How wide is the Ford 9N for transport?
The maximum published tractor width is 64 in (5.3 ft). That is 38 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the Ford 9N weight-to-horsepower ratio?
Using the page’s representative 2,900 lb weight and 16.3 hp power figure, the tractor carries about 177.8 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.






