The Farmall 300 tractor weighs 5,361 lb (2,431 kg) using its primary published weight. That places it around the 10th percentile among comparable row-crop tractors, lighter than about 90% of its peers. With 35.4 hp, the tractor carries about 151.3 lb of published weight per horsepower.
The published Farmall 300 weight is 5,361 lb (2,431 kg). The primary figure used for comparisons is 5,361 lb (2,431 kg), listed as Weight.
Tractor-weight benchmark
How this weight compares
Row-Crop Tractor peers · 510 tractors in the benchmark.
Representative published weight
Light
5,361 lb
Low5,300 lb
This model5,361 lb
Average14,006 lb
High23,810 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight5,361 lb (2,431 kg)
Overall weight bandMidweight
Tractor typeRow-Crop Tractor
Primary horsepower35.4 hp / 26.4 kW
Max length136 in (345 cm)
Max width100 in (254 cm)
Overview
Model information
Manufacturer
Farmall
Model
300
Category
Farm tractor
Model years
1954 – 1956
Tractor type
Row-Crop Tractor
Published weight variants
1
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
Weight
—
5,361 lb
2,431 kg
2.68
—
Dimensions, power & hauling
Technical details
Dimensions
Wheelbase92.25 in (234 cm)
Length136 in (345 cm)
Width100 in (254 cm)
Height77.5 in (196 cm)
Power & weight ratios
Primary power35.4 hp (26.4 kW)
Power basisDrawbar (tested)
Weight per horsepower151.3 lb/hp
Weight per foot of length473 lb/ft
Wheelbase / length67.8%
Transport snapshot
Primary published weight5,361 lb (2,431 kg)
Maximum published weight5,361 lb (2,431 kg)
Maximum US-ton equivalent2.68 US tons
Maximum published width100 in (254 cm)
Published width over 102 inNo
Weight context
Weight range5,361 lb (2,431 kg)
Primary weight basisWeight
Peer positionLight among Row-Crop Tractor peers · 10th percentile
Physical size classMid-size
For transport planning, the representative published tractor weight is about 5,361 lb (2.68 US tons); published configurations reach 5,361 lb (2.68 US tons); the widest published tractor dimension is 100 in (8.3 ft). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
Farmall 350 (5365 lb)
John Deere 1650 (5350 lb)
J.I. Case 310D (5375 lb)
Kubota M6800 (5375 lb)
Kubota M4970 (5379 lb)
Closest comparable tractors
Farmall 350 (5365 lb)
J.I. Case DC (5300 lb, 37 hp)
John Deere 2010 (5054 lb)
Farmall 460 (5835 lb)
Farmall Super BMD (5456 lb, 42 hp)
Common questions
Farmall 300 weight FAQ
How much does a Farmall 300 weigh?
The Farmall 300 weighs 5,361 lb (2,431 kg) using the primary published weight figure.
Is the Farmall 300 a lightweight row-crop tractor?
Yes. The representative figure sits at about the 10th percentile, lighter than roughly 90% of the row-crop tractor peers. That puts it in the light range for this comparison. It is 8,645 lb lighter than the peer-group average of 14,006 lb.
How wide is the Farmall 300 for transport?
The maximum published tractor width is 100 in (8.3 ft). That is 2 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the Farmall 300 weight-to-horsepower ratio?
Using the page’s representative 5,361 lb weight and 35.4 hp power figure, the tractor carries about 151.3 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Farmall 300 weigh?
The representative published weight is about 2.68 US tons, while the full published range is 2.68 US tons. Loaded transport weight can be higher than the tractor specification.
