Weight summary
The published Case IH JX80 weight is 5,702–6,915 lb (2,586–3,136 kg). The primary figure used for comparisons is 5,702 lb (2,586 kg), listed as Shipping — 2WD ROPS. The published configurations span 1,213 lb, a 21.3% difference from the lightest listed setup.
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Average
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | Case IH |
|---|---|
| Model | JX80 |
| Category | Farm tractor |
| Model years | 2007 – 2008 |
| Tractor type | Utility Tractor |
| Published weight variants | 4 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| Shipping | 2WD ROPS | 5,702 lb | 2,586 kg | 2.85 | — |
| Shipping | 4WD ROPS | 6,363 lb | 2,886 kg | 3.18 | — |
| Shipping | 2WD cab | 6,254 lb | 2,836 kg | 3.13 | — |
| Shipping | 4WD cab | 6,915 lb | 3,136 kg | 3.46 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- Case IH Farmall 80 (5702 lb)
- Case IH Farmall 90 (5702 lb)
- New Holland TD75D (5702 lb)
- New Holland TD80D (5702 lb)
- John Deere 5300 (5710 lb)
Closest comparable tractors
- Case IH Farmall 80 (5702 lb, 72 hp)
- New Holland TD75D (5702 lb, 72 hp)
- New Holland TD80D (5702 lb, 72 hp)
- Case IH 695 (5720 lb, 72 hp)
- John Deere 1950 (5798 lb)
Case IH JX80 weight FAQ
How much does a Case IH JX80 weigh?
The Case IH JX80 weighs 5,702 lb (2,586 kg) using the published Shipping — 2WD ROPS figure. Across the published configurations on this page, weight ranges from 5,702 to 6,915 lb (2,586 to 3,136 kg).
How much heavier is the 4WD Case IH JX80 than the 2WD model?
Published 2WD weight is 5,702–6,254 lb (2,586–2,837 kg), while published 4WD weight is 6,363–6,915 lb (2,886–3,137 kg). On a midpoint basis, the published 4WD configurations are about 661 lb heavier. Tires, transmission and other configuration differences can also affect the number.
Is the Case IH JX80 heavy or light for a utility tractor?
It is close to average for its peer group. The representative figure sits at about the 62nd percentile, near the middle of the utility tractor peers. That puts it in the average range for this comparison. It is 439 lb heavier than the peer-group average of 5,263 lb.
How wide is the Case IH JX80 for transport?
The maximum published tractor width is 71.2 in (5.9 ft). That is 30.8 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the Case IH JX80 weight-to-horsepower ratio?
Using the page’s representative 5,702 lb weight and 72 hp power figure, the tractor carries about 79.2 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Case IH JX80 weigh?
The representative published weight is about 2.85 US tons, while the full published range is 2.85–3.46 US tons. Loaded transport weight can be higher than the tractor specification.
