Weight summary
The published Case IH JX60 weight is 5,152–6,365 lb (2,336–2,887 kg). The primary figure used for comparisons is 5,152 lb (2,336 kg), listed as Shipping — 2WD ROPS. The published configurations span 1,213 lb, a 23.5% difference from the lightest listed setup.
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Average
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | Case IH |
|---|---|
| Model | JX60 |
| Category | Farm tractor |
| Model years | 2007 – 2008 |
| Tractor type | Utility Tractor |
| Published weight variants | 4 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| Shipping | 2WD ROPS | 5,152 lb | 2,336 kg | 2.58 | — |
| Shipping | 4WD ROPS | 5,813 lb | 2,636 kg | 2.91 | — |
| Shipping | 2WD cab | 5,704 lb | 2,587 kg | 2.85 | — |
| Shipping | 4WD cab | 6,365 lb | 2,887 kg | 3.18 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- Case IH Farmall 70 (5152 lb)
- Case IH JX70 (5152 lb)
- Kubota M4500 (5165 lb)
- International Harvester 464 (5130 lb)
- New Holland TN60A (5180 lb)
Closest comparable tractors
- Kubota M4500 (5165 lb, 55.5 hp)
- John Deere 2155 (5105 lb, 55 hp)
- International Harvester 733 (5203 lb)
- John Deere 1450 (5230 lb, 55 hp)
- New Holland TN60A (5180 lb, 57 hp)
Case IH JX60 weight FAQ
How much does a Case IH JX60 weigh?
The Case IH JX60 weighs 5,152 lb (2,336 kg) using the published Shipping — 2WD ROPS figure. Across the published configurations on this page, weight ranges from 5,152 to 6,365 lb (2,336 to 2,887 kg).
How much heavier is the 4WD Case IH JX60 than the 2WD model?
Published 2WD weight is 5,152–5,704 lb (2,337–2,587 kg), while published 4WD weight is 5,813–6,365 lb (2,637–2,887 kg). On a midpoint basis, the published 4WD configurations are about 661 lb heavier. Tires, transmission and other configuration differences can also affect the number.
Is the Case IH JX60 heavy or light for a utility tractor?
It is close to average for its peer group. The representative figure sits at about the 56th percentile, near the middle of the utility tractor peers. That puts it in the average range for this comparison. It is 111 lb lighter than the peer-group average of 5,263 lb.
How wide is the Case IH JX60 for transport?
The maximum published tractor width is 71.2 in (5.9 ft). That is 30.8 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the Case IH JX60 weight-to-horsepower ratio?
Using the page’s representative 5,152 lb weight and 55 hp power figure, the tractor carries about 93.7 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Case IH JX60 weigh?
The representative published weight is about 2.58 US tons, while the full published range is 2.58–3.18 US tons. Loaded transport weight can be higher than the tractor specification.
