The Case IH Farmall 75A tractor weighs 5,622 lb (2,550 kg) using its published 2WD ROPS weight. Other useful published figures are 7,848 lb (Max capacity) and 6,283 lb (4WD ROPS). That places it around the 60th percentile among comparable utility tractors, on the heavier side of its peer group.
The published Case IH Farmall 75A weight is 5,622–7,848 lb (2,550–3,559 kg). The primary figure used for comparisons is 5,622 lb (2,550 kg), listed as 2WD ROPS. The published configurations span 2,226 lb, a 39.6% difference from the lightest listed setup.
Tractor-weight benchmark
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Representative published weight
Average
5,622 lb
Low1,537 lb
This model5,622 lb
Average5,263 lb
High9,595 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight5,622–7,848 lb (2,550–3,559 kg)
Overall weight bandMidweight
Tractor typeUtility Tractor
Primary horsepower74 hp / 55.2 kW
Max length151.8 in (385 cm)
Max height100.2 in (254 cm)
Overview
Model information
Manufacturer
Case IH
Model
Farmall 75A
Category
Farm tractor
Model years
2019 –
Tractor type
Utility Tractor
Published weight variants
5
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
2WD ROPS
—
5,622 lb
2,550 kg
2.81
—
4WD ROPS
—
6,283 lb
2,849 kg
3.14
—
2WD Cab
—
6,173 lb
2,800 kg
3.09
—
4WD Cab
—
6,834 lb
3,099 kg
3.42
—
Max capacity
—
7,848 lb
3,559 kg
3.92
—
Configuration effect
How configuration changes the weight
2,226 lbLightest to heaviest · 39.6% spread across published variants
Dimensions, power & hauling
Technical details
Dimensions
Wheelbase81.8 in (207 cm)
Length151.8 in (385 cm)
Height100.2 in (254 cm)
Power & weight ratios
Primary power74 hp (55.2 kW)
Power basisEngine
Weight per horsepower76 lb/hp
Weight per foot of length444.4 lb/ft
Wheelbase / length53.9%
Transport snapshot
Primary published weight5,622 lb (2,550 kg)
Maximum published weight7,848 lb (3,559 kg)
Maximum US-ton equivalent3.92 US tons
Weight context
Weight range5,622–7,848 lb (2,550–3,559 kg)
Primary weight basis2WD ROPS
Peer positionAverage among Utility Tractor peers · 61st percentile
Physical size classMid-size
For transport planning, the representative published tractor weight is about 5,622 lb (2.81 US tons); published configurations reach 7,848 lb (3.92 US tons). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
Case IH Farmall 55A (5622 lb)
Case IH Farmall 65A (5622 lb)
International Harvester 485 (5622 lb)
Kubota M5-091 (5622 lb)
Kubota MZ65 (5622 lb)
Closest comparable tractors
Massey Ferguson 275 (5560 lb)
New Holland TN75 (5645 lb, 75 hp)
John Deere 1120 (5557 lb)
Kubota MZ75 (5688 lb, 74 hp)
Kubota MZ755 (5688 lb, 74 hp)
Common questions
Case IH Farmall 75A weight FAQ
How much does a Case IH Farmall 75A weigh?
The Case IH Farmall 75A weighs 5,622 lb (2,550 kg) using the published 2WD ROPS figure. Across the published configurations on this page, weight ranges from 5,622 to 7,848 lb (2,550 to 3,559 kg).
How much heavier is the 4WD Case IH Farmall 75A than the 2WD model?
Published 2WD weight is 5,622–6,173 lb (2,550–2,800 kg), while published 4WD weight is 6,283–6,834 lb (2,850–3,100 kg). On a midpoint basis, the published 4WD configurations are about 661 lb heavier. Tires, transmission and other configuration differences can also affect the number.
Is the Case IH Farmall 75A heavy or light for a utility tractor?
It is close to average for its peer group. The representative figure sits at about the 61st percentile, near the middle of the utility tractor peers. That puts it in the average range for this comparison. It is 359 lb heavier than the peer-group average of 5,263 lb.
What is the Case IH Farmall 75A weight-to-horsepower ratio?
Using the page’s representative 5,622 lb weight and 74 hp power figure, the tractor carries about 76 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Case IH Farmall 75A weigh?
The representative published weight is about 2.81 US tons, while the full published range is 2.81–3.92 US tons. Loaded transport weight can be higher than the tractor specification.
