The Allis Chalmers H3 tractor weighs 7,395 lb (3,354 kg) using its primary published weight. That places it around the 35th percentile among tractors in the dataset, on the lighter side of its peer group. With 32.1 hp, the tractor carries about 230.3 lb of published weight per horsepower.
The published Allis Chalmers H3 weight is 7,395 lb (3,354 kg). The primary figure used for comparisons is 7,395 lb (3,354 kg), listed as Weight.
Tractor-weight benchmark
How this weight compares
All tractors in this dataset · 2,282 tractors in the benchmark.
Representative published weight
Average
7,395 lb
Low1,984 lb
This model7,395 lb
Average9,927 lb
High21,767 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight7,395 lb (3,354 kg)
Overall weight bandHeavy
Tractor typeFarm tractor
Primary horsepower32.1 hp / 23.9 kW
Max length108.75 in (276 cm)
Max height71.7 in (182 cm)
Overview
Model information
Manufacturer
Allis Chalmers
Model
H3
Category
Farm tractor
Model years
1960 – 1967
Tractor type
Farm tractor
Published weight variants
1
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
Weight
—
7,395 lb
3,354 kg
3.7
—
Dimensions, power & hauling
Technical details
Dimensions
Wheelbase64 in (162 cm)
Length108.75 in (276 cm)
Height71.7 in (182 cm)
Power & weight ratios
Primary power32.1 hp (23.9 kW)
Power basisPTO (tested)
Weight per horsepower230.3 lb/hp
Weight per foot of length816 lb/ft
Wheelbase / length58.9%
Transport snapshot
Primary published weight7,395 lb (3,354 kg)
Maximum published weight7,395 lb (3,354 kg)
Maximum US-ton equivalent3.7 US tons
Weight context
Weight range7,395 lb (3,354 kg)
Primary weight basisWeight
Peer positionAverage among All tractors in this dataset · 57th percentile
Physical size classSmall
For transport planning, the representative published tractor weight is about 7,395 lb (3.7 US tons); published configurations reach 7,395 lb (3.7 US tons). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
Case IH CX100 (7396 lb)
John Deere 5700 (7397 lb)
Massey Ferguson 95 (7400 lb)
Ford 6000 (7405 lb)
John Deere 1641 (7409 lb)
Closest comparable tractors
John Deere 1641 (7409 lb)
International Harvester TD-6 (7280 lb, 31.75 hp)
J.I. Case 610 (7625 lb)
International Harvester T-6 (7500 lb, 30.85 hp)
Allis Chalmers HD3 (7645 lb, 32.53 hp)
Common questions
Allis Chalmers H3 weight FAQ
How much does an Allis Chalmers H3 weigh?
The Allis Chalmers H3 weighs 7,395 lb (3,354 kg) using the primary published weight figure.
Is the Allis Chalmers H3 heavy or light for a farm tractor?
It is close to average for its peer group. The representative figure sits at about the 57th percentile, near the middle of the all tractors in this dataset. That puts it in the average range for this comparison. It is 2,532 lb lighter than the peer-group average of 9,927 lb.
What is the Allis Chalmers H3 weight-to-horsepower ratio?
Using the page’s representative 7,395 lb weight and 32.1 hp power figure, the tractor carries about 230.3 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Allis Chalmers H3 weigh?
The representative published weight is about 3.7 US tons, while the full published range is 3.7 US tons. Loaded transport weight can be higher than the tractor specification.
