The Allis Chalmers D272 tractor weighs 2,060 lb (934 kg) using its primary published weight. That places it around the 18th percentile among comparable utility tractors, lighter than about 82% of its peers. With 27.5 hp, the tractor carries about 74.9 lb of published weight per horsepower.
The published Allis Chalmers D272 weight is 2,060 lb (934 kg). The primary figure used for comparisons is 2,060 lb (934 kg), listed as Weight.
Tractor-weight benchmark
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Representative published weight
Light
2,060 lb
Low1,537 lb
This model2,060 lb
Average5,263 lb
High9,595 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight2,060 lb (934 kg)
Overall weight bandLight
Tractor typeUtility Tractor
Primary horsepower27.5 hp / 20.5 kW
Max length110 in (279 cm)
Max height63 in (160 cm)
Overview
Model information
Manufacturer
Allis Chalmers
Model
D272
Category
Farm tractor
Model years
1957 – 1960
Tractor type
Utility Tractor
Published weight variants
1
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
Weight
—
2,060 lb
934 kg
1.03
—
Dimensions, power & hauling
Technical details
Dimensions
Wheelbase74 in (187 cm)
Length110 in (279 cm)
Height63 in (160 cm)
Power & weight ratios
Primary power27.5 hp (20.5 kW)
Power basisEngine
Weight per horsepower74.9 lb/hp
Weight per foot of length224.7 lb/ft
Wheelbase / length67.3%
Transport snapshot
Primary published weight2,060 lb (934 kg)
Maximum published weight2,060 lb (934 kg)
Maximum US-ton equivalent1.03 US tons
Weight context
Weight range2,060 lb (934 kg)
Primary weight basisWeight
Peer positionLight among Utility Tractor peers · 18th percentile
Physical size classSmall
For transport planning, the representative published tractor weight is about 2,060 lb (1.03 US tons); published configurations reach 2,060 lb (1.03 US tons). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
Allis Chalmers 5020 (2060 lb)
Case IH 1140 (2060 lb)
Kubota KT255 (2061 lb)
Kubota KT230 (2050 lb)
Kubota KT235 (2050 lb)
Closest comparable tractors
Case IH 1140 (2060 lb, 27 hp)
Kubota KT27 (2039 lb, 26.7 hp)
Kubota FT28 (2116 lb, 27.6 hp)
Massey Ferguson 22-28GC (2002 lb, 28 hp)
Massey Ferguson 1428 (2013 lb, 28.4 hp)
Common questions
Allis Chalmers D272 weight FAQ
How much does an Allis Chalmers D272 weigh?
The Allis Chalmers D272 weighs 2,060 lb (934 kg) using the primary published weight figure.
Is the Allis Chalmers D272 a lightweight utility tractor?
Yes. The representative figure sits at about the 18th percentile, lighter than roughly 82% of the utility tractor peers. That puts it in the light range for this comparison. It is 3,203 lb lighter than the peer-group average of 5,263 lb.
What is the Allis Chalmers D272 weight-to-horsepower ratio?
Using the page’s representative 2,060 lb weight and 27.5 hp power figure, the tractor carries about 74.9 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Allis Chalmers D272 weigh?
The representative published weight is about 1.03 US tons, while the full published range is 1.03 US tons. Loaded transport weight can be higher than the tractor specification.
