Weight summary
The published Allis Chalmers 180 weight is 6,420–10,270 lb (2,912–4,658 kg). The primary figure used for comparisons is 6,420 lb (2,912 kg), listed as Gas Operating. The published configurations span 3,850 lb, a 60% difference from the lightest listed setup.
How this weight compares
Row-Crop Tractor peers · 510 tractors in the benchmark.
Light
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | Allis Chalmers |
|---|---|
| Model | 180 |
| Category | Farm tractor |
| Model years | 1967 – 1973 |
| Tractor type | Row-Crop Tractor |
| Published weight variants | 3 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| Gas Operating | — | 6,420 lb | 2,912 kg | 3.21 | — |
| Diesel Operating | — | 6,510 lb | 2,952 kg | 3.25 | — |
| Ballasted | — | 10,270 lb | 4,658 kg | 5.13 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- International Harvester 833 (6426 lb)
- Kubota SMZ85 (6437 lb)
- Massey Ferguson 274SK (6439 lb)
- John Deere 5500 (6400 lb)
- Case IH Farmall 85U (6393 lb)
Closest comparable tractors
- Allis Chalmers 6060 (6465 lb, 63.83 hp)
- John Deere 70 (6538 lb)
- Massey Ferguson 180 (6685 lb, 64 hp)
- Massey Ferguson 265 (6385 lb, 60 hp)
- Massey Ferguson 275 (6610 lb, 67 hp)
Allis Chalmers 180 weight FAQ
How much does an Allis Chalmers 180 weigh?
The Allis Chalmers 180 weighs 6,420 lb (2,912 kg) using the published Gas Operating figure. Across the published configurations on this page, weight ranges from 6,420 to 10,270 lb (2,912 to 4,658 kg).
What is the operating weight of the Allis Chalmers 180?
The published operating weight is 6,420–6,510 lb (2,912–2,953 kg). This is usually a more useful real-world figure than a bare shipping specification, although ballast, loader, fuel, implements and tire setup can still increase actual working weight.
How much does the Allis Chalmers 180 weigh with ballast?
The published ballasted weight is 10,270 lb (4,658 kg). That is up to 3,850 lb (60%) above the lightest published configuration. Ballast can therefore change the practical hauling and ground-pressure picture substantially on this model.
Is the Allis Chalmers 180 a lightweight row-crop tractor?
Yes. The representative figure sits at about the 14th percentile, lighter than roughly 86% of the row-crop tractor peers. That puts it in the light range for this comparison. It is 7,586 lb lighter than the peer-group average of 14,006 lb.
How wide is the Allis Chalmers 180 for transport?
The maximum published tractor width is 76.5 in (6.4 ft). That is 25.5 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
Does the Allis Chalmers 180 weigh more than 10,000 lb?
Some configurations do. The representative published weight is 6,420 lb, and the heaviest published configuration on this page is 10,270 lb (5.13 US tons). Any trailer calculation also needs the trailer itself plus fuel, ballast, attachments and other equipment.





