The Caterpillar 365 B L II crawler excavator was introduced in 2000, with an operating weight of 149,914 lb (68 t), engine output of 404 hp (301 kW) and a bucket capacity of 4.58 yd³ (3.5 m³). Maximum digging depth is 23.8 ft (7.26 m), maximum horizontal reach is 36.2 ft (11.02 m) and it uses the 3196 ATAAC engine.
Caterpillar Crawler Excavator Specifications
Crawler Excavator • Introduced 2000 • 3196 ATAAC
Weight: 149,914 lb (68 t)Power: 404 hp (301 kW)Bucket: 4.58 yd³ (3.5 m³)Dig depth: 23.8 ft (7.26 m)
Key specifications
149,914 lb (68 t)Operating weight
404 hp (301 kW)Engine power
4.58 yd³ (3.5 m³)Bucket capacity
23.8 ft (7.26 m)Digging depth
36.2 ft (11.02 m)Horizontal reach
58,675 lbf (261 kN)Tear-out force
25.6 in (650 mm)Track width
2000Introduced
Useful excavator charts
Charts appear only when enough usable specifications are available.
Digging geometry
Dig depth
23.8 ft
Reach
36.2 ft
Transport dimensions
Length
43.6 ft
Width
11.2 ft
Height
14.3 ft
Model spec snapshot
Main numeric specifications for this excavator.
149,914 lbWeight
404 hpPower
4.58 yd³Bucket
58,675 lbfTear-out
How the Caterpillar 365 B L II compares
Comparison is against Caterpillar crawler excavators in the same broad operating-weight class where enough comparable data exists.
Engine power
404 hp
In line with avg
50th percentile
Bucket capacity
4.58 yd³
4% above avg
47th percentile
Digging depth
23.8 ft
8% below avg
54th percentile
Horizontal reach
36.2 ft
12% below avg
11th percentile
Engine power404 hp
Low 321 hpAverage 401 hpHigh 485 hp
In line with the peer average.
Bucket capacity4.58 yd³
Low 2.88 yd³Average 4.38 yd³High 5.15 yd³
About 4% above the peer average.
Digging depth23.8 ft
Low 22 ftAverage 25.8 ftHigh 34 ft
About 8% below the peer average.
Horizontal reach36.2 ft
Low 35.7 ftAverage 40.9 ftHigh 53.5 ft
About 12% below the peer average.
Tear-out force58,675 lbf
Low 51,409 lbfAverage 63,296 lbfHigh 80,482 lbf
About 7% below the peer average.
This model Peer average
Crawler excavator information
Manufacturer
Caterpillar
Model
365 B L II
Introduced
2000
Operating specifications
Operating weight
149,914 lb (68 t)
Bucket capacity
4.58 yd³ (3.5 m³)
Maximum digging depth
23.8 ft (7.26 m)
Maximum horizontal reach
36.2 ft (11.02 m)
Tear-out force
58,675 lbf (261 kN)
Engine and emissions
Engine manufacturer
Caterpillar
Engine model
3196 ATAAC
Engine power
404 hp (301 kW)
Displacement
732 cu in (12 L)
RPM at maximum torque
2000 rpm
Diesel particulate filter
No
Dimensions and transport
Transport length
43.6 ft (13.3 m)
Transport width
11.2 ft (3.4 m)
Transport height
14.3 ft (4.37 m)
Track width
25.6 in (650 mm)
Equipment and features
Air conditioning
Yes
Disclaimer: Specifications can vary by configuration, market and attachment. Verify critical dimensions, capacities and ratings against the official machine documentation and the Caterpillar USA website.
