The Caterpillar 325F crawler excavator was introduced in 2017, with an operating weight of 56,218 lb (25.5 t), engine output of 164 hp (122 kW) and a bucket capacity of 1.56 yd³ (1.19 m³). Maximum digging depth is 22 ft (6.71 m), maximum horizontal reach is 32.1 ft (9.79 m) and it uses the C4.4TTA engine.
Caterpillar Crawler Excavator Specifications
Crawler Excavator • Introduced 2017 • C4.4TTA
Weight: 56,218 lb (25.5 t)Power: 164 hp (122 kW)Bucket: 1.56 yd³ (1.19 m³)Dig depth: 22 ft (6.71 m)
Key specifications
56,218 lb (25.5 t)Operating weight
164 hp (122 kW)Engine power
1.56 yd³ (1.19 m³)Bucket capacity
22 ft (6.71 m)Digging depth
32.1 ft (9.79 m)Horizontal reach
23,830 lbf (106 kN)Tear-out force
23.6 in (600 mm)Track width
2017Introduced
Useful excavator charts
Charts appear only when enough usable specifications are available.
Digging geometry
Dig depth
22 ft
Reach
32.1 ft
Transport dimensions
Length
29.3 ft
Width
9.8 ft
Height
10 ft
Model spec snapshot
Main numeric specifications for this excavator.
56,218 lbWeight
164 hpPower
1.56 yd³Bucket
23,830 lbfTear-out
How the Caterpillar 325F compares
Comparison is against Caterpillar crawler excavators in the same broad operating-weight class where enough comparable data exists.
Engine power
164 hp
3% above avg
65th percentile
Bucket capacity
1.56 yd³
In line with avg
37th percentile
Digging depth
22 ft
In line with avg
63rd percentile
Horizontal reach
32.1 ft
In line with avg
53rd percentile
Engine power164 hp
Low 114 hpAverage 158 hpHigh 208 hp
About 3% above the peer average.
Bucket capacity1.56 yd³
Low 0.78 yd³Average 1.59 yd³High 2.11 yd³
In line with the peer average.
Digging depth22 ft
Low 19.4 ftAverage 21.5 ftHigh 25.6 ft
In line with the peer average.
Horizontal reach32.1 ft
Low 30.3 ftAverage 32.3 ftHigh 36.6 ft
In line with the peer average.
Tear-out force23,830 lbf
Low 22,256 lbfAverage 30,702 lbfHigh 45,861 lbf
About 22% below the peer average.
This model Peer average
Crawler excavator information
Manufacturer
Caterpillar
Model
325F
Introduced
2017
Boom
MB
Operating specifications
Operating weight
56,218 lb (25.5 t)
Bucket capacity
1.56 yd³ (1.19 m³)
Maximum digging depth
22 ft (6.71 m)
Maximum horizontal reach
32.1 ft (9.79 m)
Tear-out force
23,830 lbf (106 kN)
Engine and emissions
Engine manufacturer
Caterpillar
Engine model
C4.4TTA
Engine power
164 hp (122 kW)
Displacement
269 cu in (4.4 L)
Diesel particulate filter
No
Dimensions and transport
Transport length
29.3 ft (8.92 m)
Transport width
9.8 ft (2.98 m)
Transport height
10 ft (3.06 m)
Track width
23.6 in (600 mm)
Disclaimer: Specifications can vary by configuration, market and attachment. Verify critical dimensions, capacities and ratings against the official machine documentation and the Caterpillar USA website.
