The Yanmar SA426 specifications include engine power rated at 23.4 hp (17.4 kW), a hydrostatic, 2-range transmission, and a listed weight of 1,874 to 2,377 lbs.
Yanmar SA426 key specifications
| Engine power |
23.4 hp (17.4 kW) |
| PTO power |
19 hp (14.2 kW) |
| Displacement |
68 cu in (1.1 L) |
| Transmission |
hydrostatic, 2-range |
| Fuel capacity |
6.1 gal (23.1 L) |
| Weight |
1,874 to 2,377 lbs |
| Wheelbase |
63 inches (160 cm) |
Yanmar SA426 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power23.4 hp
Low 10 hpAverage 48.1 hpHigh 180 hp
PTO power19 hp
Low 10.8 hpAverage 48.8 hpHigh 139 hp
Displacement1.1 L
Low 0.4 LAverage 2.6 LHigh 7.3 L
Fuel capacity6.1 gal
Low 2.4 galAverage 19.9 galHigh 79.3 gal
Maximum listed weight2,377 lbs
Low 1,090 lbsAverage 5,021.9 lbsHigh 12,875 lbs
Wheelbase63 in
Low 47.5 inAverage 78.6 inHigh 112.2 in
This model Industry average
Yanmar SA426 power chart
Compare the available engine, PTO and drawbar power ratings.
Yanmar SA426 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity23.1 L
Yanmar SA426 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke |
2.99 × 3.23 inches (76 × 82 mm) |
| Rated RPM |
3,000 |
| Torque |
48 lb-ft (65.1 Nm) |
| Oil capacity |
3.6 qt (3.4 L) |
| Coolant capacity |
3.5 qt (3.3 L) |
| Starter |
electric |
| Starter volts |
12 |
Transmission options
| Gears |
infinite forward and reverse (2-range) |
| Oil capacity |
16.4 qt (15.5 L) |
| Transmission type |
hydrostatic |
PTO and hitch
| Rear hitch category |
Category I (LIMITED) |
| Rear lift (at 24"/610mm) |
1,208 lbs (547 kg) |
| Rear PTO |
independent |
| Rear PTO speed |
540 rpm, 1.375-inch shaft |
| Mid PTO |
independent |
| Mid PTO speed |
SAE 16/32 |
| PTO engine speed |
2,000 PTO rpm at 3,111 engine rpm |
Hydraulics
| Hydraulic type |
open center |
| Hydraulic pressure |
2,422 psi (167.0 bar) |
| Mid valves |
2 |
| Pump flow |
4 gpm (15.1 L/min) |
| Steering flow |
3.5 gpm (13.2 L/min) |
Mechanical specifications
| Clutch |
540:3,120 |
| Front axle type |
3.2 qt (3.0 L) |
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Battery volts |
12 |
Dimensions and weight
| Listed weight range |
1,874 to 2,377 lbs |
| Length |
110.4 inches (280 cm) |
| Width |
56.5 inches (143 cm) |
| Ground clearance |
12.2 inches (30 cm) |
| ROPS height |
94.4 inches (239 cm) |
| Cab height |
85.2 inches (216 cm) |
| ROPS height |
1,874 lbs (850 kg) |
| Cab height |
2,377 lbs (1,078 kg) |
| ROPS Max capacity |
3,252 lbs (1,475 kg) |
| Cab Max capacity |
3,836 lbs (1,740 kg) |
| Maximum front axle load |
1,631 lbs (739 kg) |
| Maximum rear axle load |
2,205 lbs (1,000 kg) |
| Tow capacity |
1,543 lbs (699 kg) |
Tires and tread
| Front tread |
37.8 inches (96 cm) |
| Rear tread |
42.5 inches (107 cm) |
| Lawn/turf front tire |
23-8.50-12 or 220/55R12 |
| Lawn/turf rear tire |
36-13.50-15 or 280/70R18 |
| Industrial front tire |
23-8.50-12 |
| Industrial rear tire |
14-17.5 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Yanmar website or the tractor’s operator manual.
