Case IH Farmall DX33 Specifications

The Case IH Farmall DX33 specifications include engine power rated at 33 hp (24.6 kW), transmission options including hydrostatic or gear and a listed weight of 2,440 to 2,474 lbs.

Case IH Farmall DX33 key specifications

Engine power 33 hp (24.6 kW)
Displacement 91.3 cu in (1.5 L)
Transmission hydrostatic or gear
Fuel capacity 7.3 gal (27.6 L)
Weight 2,440 to 2,474 lbs
Wheelbase 63 inches (160 cm)
Rear PTO 540 rpm, 1.375-inch shaft

Case IH Farmall DX33 industry comparison

See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.

Engine power33 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
Displacement1.5 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity7.3 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight2,474 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase63 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average

Engine specifications

Bore/Stroke 3.307 × 3.543 inches (84 × 90 mm)
Rated RPM 2,800
Starter electric
Starter volts 12

Transmission options

Gear options infinite forward and reverse or 9 forward and 3 reverse

PTO and hitch

Hydro PTO (claimed) 26.9 hp (20.1 kW)
Gear PTO (claimed) 28.6 hp (21.3 kW)
Rear hitch category Category I
Rear lift (at 24"/610mm) 1,635 lbs (741 kg)
Gear Rear PTO transmision
Hydro Rear PTO independent
Gear Mid PTO transmision
Hydro Mid PTO independent
Mid PTO speed 2,000 rpm, 1.0-inch shaft

Hydraulics

Hydraulic type open center
Pump flow 7.6 gpm (28.8 L/min)
Total flow 12.7 gpm (48.1 L/min)

Electrical specifications

Electrical ground negative
Battery volts 12

Dimensions and weight

Hydro Weight 2,474 lbs (1,122 kg)
Gear Weight 2,440 lbs (1,106 kg)

Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.