Case IH 9180 Specifications

The Case IH 9180 specifications include engine power rated at 375 hp (279.6 kW), a full power shift transmission and a listed weight of 29,000 lbs (13,154 kg).

Case IH 9180 key specifications

Engine power 375 hp (279.6 kW)
PTO power 344 hp (256.5 kW)
Displacement 855 cu in 14.0 L or 893 cu in (14.6 L)
Transmission full power shift
Fuel capacity 250 gal (946.2 L)
Weight 29,000 lbs (13,154 kg)
Wheelbase 141.5 inches (359 cm)

Case IH 9180 industry comparison

See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.

Engine power375 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power344 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement14.6 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity250 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight29,000 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase141.5 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average

Case IH 9180 power chart

Compare the available engine, PTO and drawbar power ratings.

Engine power375 hp
PTO power344 hp

Case IH 9180 capacity chart

Compare the tractor's listed fuel, hydraulic and service-fluid capacities.

Maximum fuel capacity946.2 L
Hydraulic capacity98.4 L
Engine oil38.8 L
Coolant62.5 L

Case IH 9180 dimensions chart

Compare the main listed tractor dimensions using centimetres.

Length713 cm
Wheelbase359 cm
Width243 cm
Cab height354 cm
Ground clearance49 cm

Engine specifications

Bore/Stroke 5.50 × 6.00 inches 140 × 152 mm or 5.40 × 6.50 inches 137 × 165 mm
Rated RPM 2,100
Torque 1,266 lb-ft (1,716.7 Nm)
Torque RPM 1,400
Oil capacity 41 qt (38.8 L)
Coolant capacity 66 qt (62.5 L)
Starter volts 12

Transmission options

Gears 12 forward and 2 reverse
Clutch hydraulic wet disc

PTO and hitch

Rear hitch category Category IV (optional)
Rear lift 14,000 lbs (6,350 kg)
Rear PTO independent (optional)
Rear PTO speed 1,000 rpm

Hydraulics

Hydraulic capacity 26 gal (98.4 L)
Hydraulic type closed center
Hydraulic pressure 2,500 psi (172.4 bar)
Valves 3 to 4
SCV flow 27 gpm (102.2 L/min)
Total flow 40 gpm (151.4 L/min)

Mechanical specifications

Final drives outboard planetary
Steering hydrostatic power

Electrical specifications

Electrical ground negative
Charging system alternator
Charging amps 90
Batteries 3
Battery volts 12

Dimensions and weight

Length 281 inches (713 cm)
Width 96 inches (243 cm, fenders)
Ground clearance 19.5 inches (49 cm)
Cab height 139.5 inches (354 cm)
Exhaust height 149.6 inches (379 cm)
Maximum permitted weight 40,000 lbs (18,144 kg)

Tires and tread

Front tire 24.5-32 or 30.5-32
Rear tire 24.5-32 or 30.5-32

Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.