The Case IH 9150 specifications include engine power rated at 280 hp (208.8 kW), a full power shift transmission and a listed weight of 23,000 lbs (10,432 kg).
Case IH 9150 key specifications
| Engine power |
280 hp (208.8 kW) |
| PTO power |
259 hp (193.1 kW) |
| Displacement |
611 cu in (10.0 L) |
| Transmission |
full power shift |
| Fuel capacity |
170 gal (643.5 L) |
| Weight |
23,000 lbs (10,432 kg) |
| Wheelbase |
130 inches (330 cm) |
Case IH 9150 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power280 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power259 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement10 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity170 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight23,000 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase130 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 9150 power chart
Compare the available engine, PTO and drawbar power ratings.
Case IH 9150 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity643.5 L
Case IH 9150 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke |
4.95 × 5.35 inches (126 × 136 mm) |
| Rated RPM |
2,100 |
| Torque |
910 lb-ft (1,234.0 Nm) |
| Torque RPM |
1,300 |
| Oil capacity |
33 qt (31.2 L) |
| Coolant capacity |
60 qt (56.8 L) |
| Starter volts |
12 |
Transmission options
| Gears |
12 forward and 2 reverse |
| Clutch |
hydraulic wet disc |
PTO and hitch
| Rear hitch category |
Category III (optional) |
| Rear lift |
12,750 lbs (5,783 kg) |
| Rear PTO |
independent (optional) |
| Rear PTO speed |
1,000 rpm |
Hydraulics
| Hydraulic capacity |
18 gal (68.1 L) |
| Hydraulic type |
closed center |
| Hydraulic pressure |
2,500 psi (172.4 bar) |
| Valves |
3 to 4 |
| Total flow |
27 gpm (102.2 L/min) |
Mechanical specifications
| Final drives |
inboard planetary |
| Steering |
hydrostatic power |
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Charging amps |
100 |
| Batteries |
3 |
| Battery volts |
12 |
Dimensions and weight
| Length |
272.9 inches (693 cm) |
| Width |
93.5 inches (237 cm, fenders) |
| Ground clearance |
23 inches (58 cm) |
| Hood height |
86.6 inches (219 cm) |
| Exhaust height |
143 inches (363 cm) |
| Maximum permitted weight |
32,000 lbs (14,515 kg) |
| Front axle type |
4 × 120 inches (101 × 3,048 mm) |
| Rear axle bar |
4 × 120 inches (101 × 3,048 mm) |
Tires and tread
| Front tire |
20.8-38 |
| Rear tire |
20.8-38 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
