Case IH 7150 Specifications

The Case IH 7150 specifications include PTO power rated at 215 hp (160.3 kW), a full powershift transmission and a listed weight of 18,587 lbs (8,431 kg).

Case IH 7150 key specifications

PTO power 215 hp (160.3 kW)
Displacement 504.5 cu in (8.3 L)
Transmission full powershift
Fuel capacity 95 gal (359.6 L)
Weight 18,587 lbs (8,431 kg)
Wheelbase 118.3 inches (300 cm)
Rear PTO independent

Case IH 7150 industry comparison

See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.

PTO power215 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement8.3 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity95 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight18,587 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase118.3 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average

Case IH 7150 power chart

Compare the available engine, PTO and drawbar power ratings.

PTO power215 hp
Tested PTO power241 hp
Tested drawbar power190.6 hp

Case IH 7150 capacity chart

Compare the tractor's listed fuel, hydraulic and service-fluid capacities.

Maximum fuel capacity359.6 L
Hydraulic capacity191.1 L

Power and performance

Original price $115,000 in 1993

Engine specifications

Bore/Stroke 4.488 × 5.315 inches (114 × 135 mm)
Rated RPM 2,200
Compression 16.5:1
Air cleaner dual paper elements
Starter volts 12

Transmission options

Gear options 18 forward and 4 reverse or 24 forward and 6 reverse
Clutch wet disc

PTO and hitch

Drawbar (tested) 190.56 hp (142.1 kW)
PTO (tested) 240.99 hp (179.7 kW)
Rear hitch category Category III
Hitch control electronic lower link
Rear lift 12,720 lbs (5,769 kg)
Rear PTO speed 1,000 rpm, 1.75-inch shaft
PTO engine speed 1,000 PTO rpm at 2,200 engine rpm

Hydraulics

Hydraulic capacity 50.5 gal (191.1 L)
Hydraulic type closed center pressure flow compensated (PFC)
Hydraulic pressure 2,600 psi (179.3 bar)
Valves 2 to 4
Pump flow 22 gpm (83.3 L/min)
Total flow 29 gpm (109.8 L/min)

Mechanical specifications

Steering hydrostatic power

Electrical specifications

Electrical ground negative
Charging system alternator
Batteries 2
Battery volts 12

Dimensions and weight

Ballasted weight 25,980 lbs (11,784 kg)

Tires and tread

Front tire 16.9-26
Rear tire 20.8-38

Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.