The Massey Ferguson 274SK tractor has multiple listed tire configurations, including 7.50-18 at the front and 12.4-36 at the rear. Use the table to match the tractor’s agricultural, turf, industrial and 2WD/4WD setup.
Massey Ferguson 274SK Tire Size Chart
Configuration
Tire size
Agricultural front
7.50-18 | 12.4-24
Agricultural rear
12.4-36
Recommended tire pressure
The Massey Ferguson 274SK’s recommended tire pressures depend on load and use; operators typically run fronts around 25 psi without a loader and 35 psi with one; while rears are commonly set between 12–15 psi when liquid-filled and 20–25 psi with tubes.
Before buying replacement tires
Match the complete sidewall size, rim diameter, axle position, 2WD/4WD configuration and tire type before ordering. On driven front axles, changing overall tire diameter can upset the required front-to-rear rolling ratio.
Tire Pressure
Recommended tire pressure: The Massey Ferguson 274SK’s recommended tire pressures depend on load and use; operators typically run fronts around 25 psi without a loader and 35 psi with one; while rears are commonly set between 12–15 psi when liquid-filled and 20–25 psi with tubes.
Pressure warning: Confirm the correct pressure in the official operator’s manual and the tire manufacturer’s load-and-pressure chart before inflation.
Wheelbase and Ground Clearance
Wheelbase
93.3 inches 236 cm
Specification disclaimer
These specifications are provided as a reference and may vary by production year, country, axle, wheel package and previous tire changes. Before purchasing, fitting or inflating tires, confirm the specifications using the Massey Ferguson official U.S. website, the official operator’s manual and the markings on the tires currently fitted.
