The Massey Ferguson 7715S tractor primary air filter part number is 835817M91. The inner safety filter is 4379575M1.
Massey Ferguson 7715S Air Filter Details
Primary air filter part number
835817M91
Inner safety air filter part number
4379575M1
Outer air filter part number
4379574M1
Cross-reference part numbers
43795
Air Filter Service Interval Guide
Air Filter Service Interval Guide
Dusty use
100 hrs
Average
400 hrs
Light use
800 hrs
These are practical inspection/replacement guide ranges for the row-crop tractor category. Dusty work can shorten the interval heavily, so use the restriction indicator and operator manual first.
Massey Ferguson 7715S Extra Air Filter Notes
Engine horsepower
140 hp | 104.4 kW
Primary filter note
For the Massey Ferguson 7715S, the listed primary air filter part number is 835817M91. Match the number before buying because air cleaner setups can vary by engine, serial range and market.
Outer filter note
The listed outer air filter part number is 4379574M1.
Safety filter note
The listed inner safety air filter is 4379575M1. Do not remove the safety element for normal cleaning; replace it if dirty, damaged or oil-soaked.
Fitment note
Check the old filter, air cleaner housing label and parts book before ordering if the tractor has had an engine or intake-housing change.
Power range note
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
Cross-reference note
Possible cross-reference numbers found for the Massey Ferguson 7715S: 43795. Treat these as secondary checks after the primary filter number.
Service note
Clean loose dust from the air cleaner housing before pulling the filter. Never run the tractor with the filter removed, even for a quick test.
Massey Ferguson 7715S Air Filter FAQs
Is the Massey Ferguson 7715S air filter a one-part or multi-part service?
For a full parts check, separate the service element from the safety element: buy the outer/primary service element first, then buy the inner safety element only if it is dirty, damaged or due. Do not accidentally order 4379574M1 when you meant the safety filter, or 4379575M1 when you meant the outer filter.
How should I verify the Massey Ferguson 7715S air filter before fitting it?
Treat 835817M91 as the hero value, not the whole truth. Serial range, engine swaps and different air-cleaner housings can beat a generic online listing.
How do I avoid mixing up Massey Ferguson 7715S outer and safety filters?
This is not a one-number job. The outer and inner elements have different jobs, so compare both old parts before buying a kit.
Does engine power change how I service the Massey Ferguson 7715S air filter?
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
Can I use aftermarket cross-reference filters on a Massey Ferguson 7715S?
A cross-reference is only as good as the brand’s catalog data. Verify the drawing or the removed filter before installing.
Can a similar Massey Ferguson 7715S air-filter number still be wrong?
The part-number pattern can help spot junk listings. If a seller’s number looks nothing like the catalog style, verify it against a real drawing.
Can I clean the Massey Ferguson 7715S inner safety filter?
No. The inner safety element is backup protection, not the part to disturb every time. Leave it seated while the outer element is out so dust cannot fall into the intake.
Official information note
Mistakes do happen. Air filter specs can change by year, engine, serial range, market and air cleaner housing. Check the old filter, operator manual, parts book and official masseyferguson.com website before ordering or installing an air filter.
