The Massey Ferguson 5310 tractor primary air filter part number is 3702815M1. The inner safety filter is 3703704M91.
Massey Ferguson 5310 Air Filter Details
Primary air filter part number
3702815M1
Inner safety air filter part number
3703704M91
Outer air filter part number
4379574M1
Air filter dimensions
Length: 9.4 in | Outside diameter: 4.1 in | Inside diameter: 0.4 in
Air Filter Service Interval Guide
Air Filter Service Interval Guide
Dusty use
100 hrs
Average
500 hrs
Light use
1,000 hrs
Listed Filter Size Check
Length
9.4 in
Outside diameter
4.1 in
Inside diameter
0.4 in
These are practical inspection/replacement guide ranges for the large ag tractor category. Dusty work can shorten the interval heavily, so use the restriction indicator and operator manual first.
Massey Ferguson 5310 Extra Air Filter Notes
Primary filter note
For the Massey Ferguson 5310, the listed primary air filter part number is 3702815M1. Match the number before buying because air cleaner setups can vary by engine, serial range and market.
Outer filter note
The listed outer air filter part number is 4379574M1.
Safety filter note
The listed inner safety air filter is 3703704M91. Do not remove the safety element for normal cleaning; replace it if dirty, damaged or oil-soaked.
Fitment note
Listed dimensions: Length: 9.4 in | Outside diameter: 4.1 in | Inside diameter: 0.4 in. Use dimensions as a second check, not as the only buying method.
Filter size note
The listed dimensions point to a mid-size element length at 9.4 in and normal outside diameter at 4.1 in. Use that as a fitment sanity check against the old filter.
Service note
Clean loose dust from the air cleaner housing before pulling the filter. Never run the tractor with the filter removed, even for a quick test.
Massey Ferguson 5310 Air Filter FAQs
Should I order one filter or a full Massey Ferguson 5310 air-filter set?
For a full parts check, separate the service element from the safety element: buy the outer/primary service element first, then buy the inner safety element only if it is dirty, damaged or due. Do not accidentally order 4379574M1 when you meant the safety filter, or 3703704M91 when you meant the outer filter.
How should I verify the Massey Ferguson 5310 air filter before fitting it?
The buying order should be: old filter number first, housing fit second, then cross-reference. Start with 3702815M1, but do not ignore the a primary, outer and inner safety element setup. The size data points to a mid-size element, so compare the removed element against both length and outside diameter before fitting.
What do the Massey Ferguson 5310 air filter dimensions tell me?
The useful thing is the relationship between the three measurements: length checks housing depth, outside diameter checks the outer seal, and inside diameter checks the center opening. A filter can match two and still fail the third.
Can a similar Massey Ferguson 5310 air-filter number still be wrong?
Multiple numbers are useful only if each one is tied to the correct element position. Wrong element in the right brand is still wrong.
What does the outer-filter listing mean for the Massey Ferguson 5310?
Multiple numbers usually means a staged air cleaner. Replace the loaded outer element first, then inspect the safety element without exposing the clean intake to dust.
What mistake ruins the point of the Massey Ferguson 5310 safety filter?
Do not treat the safety filter like a second primary filter. It should stay protected; once it is dirty, replace it instead of trying to revive it with air pressure.
What is the practical service rule for the Massey Ferguson 5310 air filter?
Use the 500-hour guide as a baseline, then adjust for dust. Clean use can stretch it; loader work, dry mowing and chaff should shorten it.
Official information note
Mistakes do happen. Air filter specs can change by year, engine, serial range, market and air cleaner housing. Check the old filter, operator manual, parts book and official masseyferguson.com website before ordering or installing an air filter.
