The Massey Ferguson 3120 tractor primary air filter part number is 7068311M91. The inner safety filter is 6242781M91.
Massey Ferguson 3120 Air Filter Details
Primary air filter part number
7068311M91
Inner safety air filter part number
6242781M91
Outer air filter part number
7068069M1
Air Filter Service Interval Guide
Air Filter Service Interval Guide
Dusty use
100 hrs
Average
400 hrs
Light use
800 hrs
These are practical inspection/replacement guide ranges for the row-crop tractor category. Dusty work can shorten the interval heavily, so use the restriction indicator and operator manual first.
Massey Ferguson 3120 Extra Air Filter Notes
Engine model
Quadram 1000
Engine horsepower
120 hp | 89.5 kW
Primary filter note
For the Massey Ferguson 3120, the listed primary air filter part number is 7068311M91. Match the number before buying because air cleaner setups can vary by engine, serial range and market.
Outer filter note
The listed outer air filter part number is 7068069M1.
Safety filter note
The listed inner safety air filter is 6242781M91. Do not remove the safety element for normal cleaning; replace it if dirty, damaged or oil-soaked.
Fitment note
Check the old filter, air cleaner housing label and parts book before ordering if the tractor has had an engine or intake-housing change.
Power range note
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
Service note
Clean loose dust from the air cleaner housing before pulling the filter. Never run the tractor with the filter removed, even for a quick test.
Massey Ferguson 3120 Air Filter FAQs
Why should I compare the old Massey Ferguson 3120 filter before buying?
Use 7068311M91 as the anchor number, then verify the old element and housing label. This is a Massey-style M-suffix number, and the setup looks like a primary, outer and inner safety element setup, so one loose search result is not enough.
Is the Massey Ferguson 3120 air filter a one-part or multi-part service?
For a full parts check, separate the service element from the safety element: buy the outer/primary service element first, then buy the inner safety element only if it is dirty, damaged or due. Do not accidentally order 7068069M1 when you meant the safety filter, or 6242781M91 when you meant the outer filter.
How do the Massey Ferguson 3120 outer and primary filters differ?
This looks like a multi-element setup. Keep the outer/primary service element and the inner safety element separate when ordering, because mixing up 7068069M1 and 6242781M91 is the easy mistake.
Why does the full Massey Ferguson 3120 air-filter number matter?
When there are several part numbers, do not search them all in one cart and hope. Label each one as primary, outer or safety before buying.
Why does the Massey Ferguson 3120 horsepower class matter for filters?
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
Does the Massey Ferguson 3120 engine setup affect air filter fitment?
The engine detail helps identify the likely intake setup, but it does not replace checking the removed element. Air-cleaner housings can change inside the same model family.
Should I blow out the Massey Ferguson 3120 inner safety element?
The inner element is there for the mistake moment: a torn outer filter, bad seal or dusty service. Keep it clean and seated while working around 7068311M91.
Official information note
Mistakes do happen. Air filter specs can change by year, engine, serial range, market and air cleaner housing. Check the old filter, operator manual, parts book and official masseyferguson.com website before ordering or installing an air filter.
