The Massey Ferguson 3050 tractor primary air filter part number is 835817M91. The inner safety filter is 3703704M91.
Massey Ferguson 3050 Air Filter Details
Primary air filter part number
835817M91
Inner safety air filter part number
3703704M91
Outer air filter part number
7068069M1
Cross-reference part numbers
70680
Air Filter Service Interval Guide
Air Filter Service Interval Guide
Dusty use
100 hrs
Average
300 hrs
Light use
600 hrs
These are practical inspection/replacement guide ranges for the utility tractor category. Dusty work can shorten the interval heavily, so use the restriction indicator and operator manual first.
Massey Ferguson 3050 Extra Air Filter Notes
Engine displacement
4.4 L | 268.5 cu in
Engine horsepower
68 hp | 50.7 kW
Primary filter note
For the Massey Ferguson 3050, the listed primary air filter part number is 835817M91. Match the number before buying because air cleaner setups can vary by engine, serial range and market.
Outer filter note
The listed outer air filter part number is 7068069M1.
Safety filter note
The listed inner safety air filter is 3703704M91. Do not remove the safety element for normal cleaning; replace it if dirty, damaged or oil-soaked.
Fitment note
Check the old filter, air cleaner housing label and parts book before ordering if the tractor has had an engine or intake-housing change.
Power range note
This sits in the utility range. The 300-hour guide is useful for planning, but dusty work should shorten the inspection cycle.
Engine airflow note
Engine size is useful context for service urgency, not a license to ignore the part number. The canister and seal decide fitment.
Cross-reference note
Possible cross-reference numbers found for the Massey Ferguson 3050: 70680. Treat these as secondary checks after the primary filter number.
Service note
Clean loose dust from the air cleaner housing before pulling the filter. Never run the tractor with the filter removed, even for a quick test.
Massey Ferguson 3050 Air Filter FAQs
How do I avoid mixing up the Massey Ferguson 3050 air-filter elements?
For a full parts check, separate the service element from the safety element: buy the outer/primary service element first, then buy the inner safety element only if it is dirty, damaged or due. Do not accidentally order 7068069M1 when you meant the safety filter, or 3703704M91 when you meant the outer filter.
What should I check before ordering a Massey Ferguson 3050 air filter?
Because this listing shows a primary, outer and inner safety element setup, the risk is ordering one correct number and one wrong companion element. Keep 835817M91 as the main reference, then confirm the other elements separately.
Can I ignore letters or suffixes in the Massey Ferguson 3050 filter number?
When there are several part numbers, do not search them all in one cart and hope. Label each one as primary, outer or safety before buying.
Can I use aftermarket cross-reference filters on a Massey Ferguson 3050?
A cross-reference is only as good as the brand’s catalog data. Verify the drawing or the removed filter before installing.
Why not stretch a dirty Massey Ferguson 3050 air filter under load?
This sits in the utility range. The 300-hour guide is useful for planning, but dusty work should shorten the inspection cycle.
What order should I check the Massey Ferguson 3050 air-filter elements?
The outer filter is the dirt-catcher; the inner filter is the backup. Service them with different expectations instead of replacing both out of habit.
Why should the Massey Ferguson 3050 safety filter stay seated?
No. The inner safety element is backup protection, not the part to disturb every time. Leave it seated while the outer element is out so dust cannot fall into the intake.
Official information note
Mistakes do happen. Air filter specs can change by year, engine, serial range, market and air cleaner housing. Check the old filter, operator manual, parts book and official masseyferguson.com website before ordering or installing an air filter.
